Benchmark #8164 - pibenchmarks.com

Brand: SanDisk SD Ultra A1 (SC32G)
A1 C10 U1
#3 / 1,539
1,108
#1,214 / 1,539
#200 / 369
1,092
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-02-06 03:46:24
#8,164
1,019
-73 (-7.16%)
Anonymous
pen_teste

Secure Digital (SD) Card Details
SanDisk SD Ultra A1 (SC32G)
A1 C10 U1
29.5G
SD
SanDisk
SC32G
SDHC
5.00
0x03
SD
8.0
05/2019
Class 10
A1
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Ubuntu 19.10
armv7l

Benchmark Results
17.8 MB/s
39.94 MB/s
33.99 MB/s
781 IOPS
3,001 IOPS
3,127 KB/s
12,006 KB/s
7,912 KB/s
3,204 KB/s
7,209 KB/s
2,473 KB/s

inxi Results
System: Host: Myserver Kernel: 5.3.0-1017-raspi2 armv7l bits: 32 compiler: gcc v: 9.2.1 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc Console: tty 0 dm: N/A Distro: Ubuntu 19.10 (Eoan Ermine) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.73 GiB used: 233.8 MiB (6.1%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 44.31 GiB used: 2.62 GiB (5.9%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: 1Cruzer size: 14.59 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.47 GiB size: 28.97 GiB (98.29%) used: 2.53 GiB (8.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: writable uuid: 058a5631-449b-4124-bf2b-591861b2dbef ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 90.2 MiB (35.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: system-boot uuid: BE97-F4FF ID-3: /snap/core/8043 raw size: 76.1 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A ID-4: /snap/core/8270 raw size: 76.0 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A ID-5: /snap/lxd/12633 raw size: 47.2 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A ID-6: /snap/lxd/13255 raw size: 52.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop3 label: N/A uuid: N/A Unmounted: ID-1: /dev/sda1 size: 14.59 GiB fs: vfat label: GERAL uuid: 5886-4E40 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: SanDisk Cruzer Blade type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5567 Device-2: 1-1.2:4 info: China Resource Semico type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1a2c:2c27 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //ports.ubuntu.com/ubuntu-ports eoan main restricted 2: deb http: //ports.ubuntu.com/ubuntu-ports eoan-updates main restricted 3: deb http: //ports.ubuntu.com/ubuntu-ports eoan universe 4: deb http: //ports.ubuntu.com/ubuntu-ports eoan-updates universe 5: deb http: //ports.ubuntu.com/ubuntu-ports eoan multiverse 6: deb http: //ports.ubuntu.com/ubuntu-ports eoan-updates multiverse 7: deb http: //ports.ubuntu.com/ubuntu-ports eoan-backports main restricted universe multiverse 8: deb http: //ports.ubuntu.com/ubuntu-ports eoan-security main restricted 9: deb http: //ports.ubuntu.com/ubuntu-ports eoan-security universe 10: deb http: //ports.ubuntu.com/ubuntu-ports eoan-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-eoan.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu eoan main Processes: CPU top: 5 1: cpu: 0.4% command: init pid: 1 mem: 8.04 MiB (0.2%) 2: cpu: 0.2% command: sshd: pid: 2091 mem: 3.73 MiB (0.0%) 3: cpu: 0.1% command: snapd pid: 1229 mem: 16.2 MiB (0.4%) 4: cpu: 0.1% command: sftp-server pid: 2092 mem: 2.77 MiB (0.0%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 16.2 MiB (0.4%) command: snapd pid: 1229 cpu: 0.1% 2: mem: 13.9 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 1255 cpu: 0.0% 3: mem: 13.8 MiB (0.3%) command: multipathd pid: 1118 cpu: 0.0% 4: mem: 12.3 MiB (0.3%) command: systemd-journald pid: 710 cpu: 0.0% 5: mem: 11.6 MiB (0.3%) command: networkd-dispatcher started by: python3 pid: 1222 cpu: 0.0% Info: Processes: 154 Uptime: 40m Init: systemd v: 242 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: Myserver Kernel: 5.3.0-1017-raspi2 armv7l bits: 32 compiler: gcc v: 9.2.1 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 
           dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable 
           rootfstype=ext4 elevator=deadline rootwait fixrtc 
           Console: tty 0 dm: N/A Distro: Ubuntu 19.10 (Eoan Ermine) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.73 GiB used: 233.8 MiB (6.1%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 44.31 GiB used: 2.62 GiB (5.9%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: 1Cruzer size: 14.59 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.00 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.47 GiB size: 28.97 GiB (98.29%) used: 2.53 GiB (8.7%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: writable 
           uuid: 058a5631-449b-4124-bf2b-591861b2dbef 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 90.2 MiB (35.8%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 
           label: system-boot uuid: BE97-F4FF 
           ID-3: /snap/core/8043 raw size: 76.1 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop2 label: N/A uuid: N/A 
           ID-4: /snap/core/8270 raw size: 76.0 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
           ID-5: /snap/lxd/12633 raw size: 47.2 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A 
           ID-6: /snap/lxd/13255 raw size: 52.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop3 label: N/A uuid: N/A 
Unmounted: ID-1: /dev/sda1 size: 14.59 GiB fs: vfat label: GERAL uuid: 5886-4E40 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: SanDisk Cruzer Blade type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0781:5567 Device-2: 1-1.2:4 info: China Resource Semico type: Keyboard,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 1a2c:2c27 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //ports.ubuntu.com/ubuntu-ports eoan main restricted
           2: deb http: //ports.ubuntu.com/ubuntu-ports eoan-updates main restricted
           3: deb http: //ports.ubuntu.com/ubuntu-ports eoan universe
           4: deb http: //ports.ubuntu.com/ubuntu-ports eoan-updates universe
           5: deb http: //ports.ubuntu.com/ubuntu-ports eoan multiverse
           6: deb http: //ports.ubuntu.com/ubuntu-ports eoan-updates multiverse
           7: deb http: //ports.ubuntu.com/ubuntu-ports eoan-backports main restricted universe multiverse
           8: deb http: //ports.ubuntu.com/ubuntu-ports eoan-security main restricted
           9: deb http: //ports.ubuntu.com/ubuntu-ports eoan-security universe
           10: deb http: //ports.ubuntu.com/ubuntu-ports eoan-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-eoan.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu eoan main
Processes: CPU top: 5 
           1: cpu: 0.4% command: init pid: 1 mem: 8.04 MiB (0.2%) 
           2: cpu: 0.2% command: sshd: pid: 2091 mem: 3.73 MiB (0.0%) 
           3: cpu: 0.1% command: snapd pid: 1229 mem: 16.2 MiB (0.4%) 
           4: cpu: 0.1% command: sftp-server pid: 2092 mem: 2.77 MiB (0.0%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 16.2 MiB (0.4%) command: snapd pid: 1229 cpu: 0.1% 
           2: mem: 13.9 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 1255 cpu: 0.0% 
           3: mem: 13.8 MiB (0.3%) command: multipathd pid: 1118 cpu: 0.0% 
           4: mem: 12.3 MiB (0.3%) command: systemd-journald pid: 710 cpu: 0.0% 
           5: mem: 11.6 MiB (0.3%) command: networkd-dispatcher started by: python3 pid: 1222 
           cpu: 0.0% 
Info:      Processes: 154 Uptime: 40m Init: systemd v: 242 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #8164 - Brand: SanDisk SD Ultra A1 (SC32G)