Benchmark #7748 - pibenchmarks.com

Brand: Kingston DataTraveler DTR30
USB Flash
#91 / 1,539
120
#1,276 / 1,539
#43 / 90
#43 / 86
990
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-28 15:11:32
#7,748
830
-160 (-19.28%)
Anonymous

Storage Details
Kingston DataTraveler DTR30
USB Flash
57.8G
USB Flash
Kingston
DataTraveler3.0
3.00
5,000
0951:1666
0x0951 (Kingston Technology)
0x1666 (DataTraveler 100 G3/G4/SE9 G2/50)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
21.6 MB/s
66.6 MB/s
68.7 MB/s
103 IOPS
1,785 IOPS
415 KB/s
7,143 KB/s
16,765 KB/s
2,211 KB/s
7,791 KB/s
328 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_ADDRESS = "lt_LT.UTF-8", LC_NAME = "lt_LT.UTF-8", LC_MONETARY = "lt_LT.UTF-8", LC_PAPER = "lt_LT.UTF-8", LC_IDENTIFICATION = "lt_LT.UTF-8", LC_TELEPHONE = "lt_LT.UTF-8", LC_MEASUREMENT = "lt_LT.UTF-8", LC_NUMERIC = "lt_LT.UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=0951:1666:u console=ttyS0,115200 console=tty1 root=PARTUUID=636e9f78-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 489.5 MiB (12.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: WAN IP: Drives: Local Storage: total: 72.59 GiB used: 5.37 GiB (7.4%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: Kingston model: DataTraveler 3.0 size: 57.75 GiB block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 57.75 GiB size: 56.59 GiB (98.00%) used: 5.32 GiB (9.4%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 1e6558d4-6f38-40fb-a325-f638bc67677c ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 1.84 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: Samsung ML-216x Series Laser Printer type: Printer driver: N/A interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 04e8:330f Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-1:2 info: Kingston DataTraveler 100 G3/G4/SE9 G2 type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0951:1666 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/raspotify.list 1: deb https: //dtcooper.github.io/raspotify raspotify main Processes: CPU top: 5 1: cpu: 2.0% command: python pid: 643 mem: 43.0 MiB (1.1%) 2: cpu: 1.0% command: embyserver pid: 472 mem: 118.8 MiB (3.0%) 3: cpu: 0.3% command: plex pid: 1602 mem: 31.8 MiB (0.8%) 4: cpu: 0.2% command: plex pid: 512 mem: 47.7 MiB (1.2%) 5: cpu: 0.1% command: init pid: 1 mem: 8.04 MiB (0.2%) Memory top: 5 1: mem: 118.8 MiB (3.0%) command: embyserver pid: 472 cpu: 1.0% 2: mem: 51.0 MiB (1.3%) command: mysqld pid: 856 cpu: 0.1% 3: mem: 47.7 MiB (1.2%) command: plex pid: 512 cpu: 0.2% 4: mem: 43.0 MiB (1.1%) command: python pid: 643 cpu: 2.0% 5: mem: 34.9 MiB (0.8%) command: gunicorn started by: python2.7 pid: 1406 cpu: 0.0% Info: Processes: 134 Uptime: 1h 25m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_ADDRESS = "lt_LT.UTF-8",
	LC_NAME = "lt_LT.UTF-8",
	LC_MONETARY = "lt_LT.UTF-8",
	LC_PAPER = "lt_LT.UTF-8",
	LC_IDENTIFICATION = "lt_LT.UTF-8",
	LC_TELEPHONE = "lt_LT.UTF-8",
	LC_MEASUREMENT = "lt_LT.UTF-8",
	LC_NUMERIC = "lt_LT.UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Host: raspberrypi Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=0951:1666:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=636e9f78-01 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 489.5 MiB (12.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 72.59 GiB used: 5.37 GiB (7.4%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: Kingston model: DataTraveler 3.0 size: 57.75 GiB 
           block size: physical: 512 B logical: 512 B rev: PMAP scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 57.75 GiB size: 56.59 GiB (98.00%) used: 5.32 GiB (9.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 1e6558d4-6f38-40fb-a325-f638bc67677c 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 1.84 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: Samsung ML-216x Series Laser Printer type: Printer driver: N/A 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 04e8:330f Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-1:2 info: Kingston DataTraveler 100 G3/G4/SE9 G2 type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0951:1666 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb public main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspotify.list 
           1: deb https: //dtcooper.github.io/raspotify raspotify main
Processes: CPU top: 5 
           1: cpu: 2.0% command: python pid: 643 mem: 43.0 MiB (1.1%) 
           2: cpu: 1.0% command: embyserver pid: 472 mem: 118.8 MiB (3.0%) 
           3: cpu: 0.3% command: plex pid: 1602 mem: 31.8 MiB (0.8%) 
           4: cpu: 0.2% command: plex pid: 512 mem: 47.7 MiB (1.2%) 
           5: cpu: 0.1% command: init pid: 1 mem: 8.04 MiB (0.2%) 
           Memory top: 5 
           1: mem: 118.8 MiB (3.0%) command: embyserver pid: 472 cpu: 1.0% 
           2: mem: 51.0 MiB (1.3%) command: mysqld pid: 856 cpu: 0.1% 
           3: mem: 47.7 MiB (1.2%) command: plex pid: 512 cpu: 0.2% 
           4: mem: 43.0 MiB (1.1%) command: python pid: 643 cpu: 2.0% 
           5: mem: 34.9 MiB (0.8%) command: gunicorn started by: python2.7 pid: 1406 cpu: 0.0% 
Info:      Processes: 134 Uptime: 1h 25m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #7748 - Brand: Kingston DataTraveler DTR30