Benchmark #7608 - pibenchmarks.com

Brand: Kingston A400S Series
SSD (2.5" SATA)
#1 / 1,539
2,595
#516 / 1,539
#496 / 875
#140 / 363
6,144
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-01-26 03:31:04
#7,608
2,570
-3,574 (-139.07%)
Kenshiro
Kingston SSD on Pi4 using SABRENT USB Adapter on USB2

Storage Details
Kingston A400S Series
SSD (2.5" SATA)
120G
SSD
Kingston
SA400S37120G
2.5 inch
SATA
2.10
480
2109:1561
0x2109
0x1561
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
30.2 MB/s
23.55 MB/s
23.65 MB/s
3,813 IOPS
3,134 IOPS
15,255 KB/s
12,537 KB/s
11,643 KB/s
10,114 KB/s
9,530 KB/s
11,579 KB/s

inxi Results
System: Host: raspberrypi Kernel: 4.19.88-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 460.1 MiB (11.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 151x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.88-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 141.51 GiB used: 8.55 GiB (6.0%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB model: SABRENT SABRENT size: 111.79 GiB block size: physical: 4096 B logical: 512 B rev: 0204 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.79 GiB size: 109.53 GiB (97.98%) used: 8.50 GiB (7.8%) fs: ext4 block size: 4096 B dev: /dev/sda label: N/A uuid: 87bc8cac-2058-4f2e-97f2-f415b12dca88 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: Cygnal Integrated Products CP2102/CP2109 UART Bridge Controller [CP210x family] type: driver: cp210x interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 10c4:ea60 Device-2: 1-1.3:4 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:1561 Device-3: 1-1.4:5 info: Future Devices Bridge(I2C/SPI/UART/FIFO) type: driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 0403:6015 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 1: deb https: //downloads.plex.tv/repo/deb public main No active apt repos in: /etc/apt/sources.list.d/pms.list Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 1: deb http: //linux.teamviewer.com/deb stable main Processes: CPU top: 5 1: cpu: 5.1% command: jeecron.php started by: php pid: 6896 mem: 28.9 MiB (0.7%) 2: cpu: 1.7% command: init pid: 1 mem: 8.05 MiB (0.2%) 3: cpu: 1.6% command: plex pid: 671 mem: 30.9 MiB (0.7%) 4: cpu: 1.1% command: rfxcomd.py started by: python pid: 2145 mem: 19.8 MiB (0.5%) 5: cpu: 0.9% command: mysqld pid: 629 mem: 59.4 MiB (1.5%) Memory top: 5 1: mem: 59.4 MiB (1.5%) command: mysqld pid: 629 cpu: 0.9% 2: mem: 48.1 MiB (1.2%) command: jeecron.php started by: php pid: 1980 cpu: 0.6% 3: mem: 44.4 MiB (1.1%) command: plex pid: 500 cpu: 0.5% 4: mem: 30.9 MiB (0.7%) command: plex pid: 671 cpu: 1.6% 5: mem: 29.7 MiB (0.7%) command: jeecron.php started by: php pid: 1968 cpu: 0.1% Info: Processes: 171 Uptime: 8m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: raspberrypi Kernel: 4.19.88-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/sda rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 460.1 MiB (11.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 
           Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 151x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.88-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 141.51 GiB used: 8.55 GiB (6.0%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB model: SABRENT SABRENT size: 111.79 GiB block size: 
           physical: 4096 B logical: 512 B rev: 0204 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.79 GiB size: 109.53 GiB (97.98%) used: 8.50 GiB (7.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda label: N/A uuid: 87bc8cac-2058-4f2e-97f2-f415b12dca88 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 3FFE-CDCA 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: rootfs 
           uuid: 3122c401-b3c6-4d27-8e0d-6708a7613aed 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 
           info: Cygnal Integrated Products CP2102/CP2109 UART Bridge Controller [CP210x family] 
           type:  driver: cp210x interfaces: 1 rev: 1.1 speed: 12 Mb/s 
           chip ID: 10c4:ea60 Device-2: 1-1.3:4 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:1561 Device-3: 1-1.4:5 info: Future Devices Bridge(I2C/SPI/UART/FIFO) 
           type:  driver: ftdi_sio interfaces: 1 rev: 2.0 speed: 12 Mb/s 
           chip ID: 0403:6015 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           1: deb https: //downloads.plex.tv/repo/deb public main
           No active apt repos in: /etc/apt/sources.list.d/pms.list 
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http: //linux.teamviewer.com/deb stable main
Processes: CPU top: 5 
           1: cpu: 5.1% command: jeecron.php started by: php pid: 6896 mem: 28.9 MiB (0.7%) 
           2: cpu: 1.7% command: init pid: 1 mem: 8.05 MiB (0.2%) 
           3: cpu: 1.6% command: plex pid: 671 mem: 30.9 MiB (0.7%) 
           4: cpu: 1.1% command: rfxcomd.py started by: python pid: 2145 mem: 19.8 MiB (0.5%) 
           5: cpu: 0.9% command: mysqld pid: 629 mem: 59.4 MiB (1.5%) 
           Memory top: 5 
           1: mem: 59.4 MiB (1.5%) command: mysqld pid: 629 cpu: 0.9% 
           2: mem: 48.1 MiB (1.2%) command: jeecron.php started by: php pid: 1980 cpu: 0.6% 
           3: mem: 44.4 MiB (1.1%) command: plex pid: 500 cpu: 0.5% 
           4: mem: 30.9 MiB (0.7%) command: plex pid: 671 cpu: 1.6% 
           5: mem: 29.7 MiB (0.7%) command: jeecron.php started by: php pid: 1968 cpu: 0.1% 
Info:      Processes: 171 Uptime: 8m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #7608 - Brand: Kingston A400S Series