Benchmark #28309 - pibenchmarks.com

Brand: Samsung SD EVO (EC2QT)
C10 U3
#26 / 1,539
359
#1,192 / 1,539
#183 / 369
1,144
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-29 15:07:16
#28,309
1,388
+244 (+17.58%)
Anonymous

Secure Digital (SD) Card Details
Samsung SD EVO (EC2QT)
C10 U3
59.4G
SD
Samsung
EC2QT
SDXC
3.00
0x1b
SM
3.0
11/2019
Class 10
None
U3
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
16.4 MB/s
41.84 MB/s
41.22 MB/s
513 IOPS
3,434 IOPS
2,053 KB/s
13,738 KB/s
9,883 KB/s
4,620 KB/s
12,163 KB/s
4,047 KB/s

inxi Results
System: Host: piofbadi2 Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 660.4 MiB (32.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 150x60 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::ce6c:e3b1:7c3c:419f/64 type: noprefixroute scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 35.141.X.X Drives: Local Storage: total: 2.90 TiB used: 579.08 GiB (19.5%) ID-1: /dev/mmcblk0 model: EC2QT size: 59.62 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A1 drive model: WD30NMZW-11GX6S1 family: Elements / My Passport (USB, AF) size: 2.73 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rotation: 5400 rpm drive WD-WX11D9868T3L rev: 1014 drive rev: 01.01A01 temp: 35 C scheme: GPT SMART: yes state: enabled health: PASSED on: 299d 6h cycles: 28 ID-3: /dev/sdb type: USB model: Z3-128 size: 119.24 GiB block size: physical: 4096 B logical: 512 B rev: 1214 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.37 GiB size: 58.43 GiB (98.41%) used: 5.00 GiB (8.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /media/usb-drive raw size: 119.24 GiB size: 119.24 GiB (100.00%) used: 92.8 MiB (0.1%) fs: ntfs block size: 4096 B dev: /dev/sdb1 label: N/A uuid: 000EDE8200055839 ID-4: /media/usb-drive2 raw size: 1.78 TiB size: 1.78 TiB (100.00%) used: 573.95 GiB (31.6%) fs: btrfs block size: 4096 B dev: /dev/sda2 label: backup uuid: ab23f18c-e33a-4456-966a-fa58c9aca818 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 56.2 MiB (56.3%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 size: 976.56 GiB fs: ntfs label: Elements uuid: 344C12A74C126440 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:4 info: Intrinsix type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0578:0578 Device-2: 2-2:2 info: Western Digital Elements / My Passport (WD20NMVW) type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:25a1 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 962 lib: 503 Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https://deb.nodesource.com/node_12.x buster main 2: deb-src https://deb.nodesource.com/node_12.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 195 1: cpu: 6.8% command: sdb1 started by: mount.ntfs pid: 15393 mem: 2.16 MiB (0.1%) 2: cpu: 4.6% command: apps.plugin pid: 11959 mem: 4.54 MiB (0.2%) 3: cpu: 2.6% command: netdata pid: 11671 mem: 87.3 MiB (4.5%) 4: cpu: 1.5% command: python.d.plugin started by: python pid: 11962 mem: 17.7 MiB (0.9%) 5: cpu: 0.6% command: camera.js started by: node pid: 3987 mem: 52.0 MiB (2.6%) Memory top: 5 of 195 1: mem: 162.9 MiB (8.4%) command: mysqld pid: 1017 cpu: 0.1% 2: mem: 87.3 MiB (4.5%) command: netdata pid: 11671 cpu: 2.6% 3: mem: 52.0 MiB (2.6%) command: camera.js started by: node pid: 3987 cpu: 0.6% 4: mem: 40.9 MiB (2.1%) command: pm2 pid: 2542 cpu: 0.5% 5: mem: 33.1 MiB (1.7%) command: cron.js started by: node pid: 3997 cpu: 0.0% Info: Processes: 195 Uptime: 4d 18h 46m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 inxi: 3.1.04

inxi Results

System:    Host: piofbadi2 Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
Memory:    RAM: total: 1.97 GiB used: 660.4 MiB (32.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 150x60 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::ce6c:e3b1:7c3c:419f/64 type: noprefixroute scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 35.141.X.X 
Drives:    Local Storage: total: 2.90 TiB used: 579.08 GiB (19.5%) 
           ID-1: /dev/mmcblk0 model: EC2QT size: 59.62 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A1 drive model: WD30NMZW-11GX6S1 
           family: Elements / My Passport (USB, AF) size: 2.73 TiB block size: physical: 4096 B logical: 512 B sata: 3.1 
           speed: 6.0 Gb/s rotation: 5400 rpm drive WD-WX11D9868T3L rev: 1014 
           drive rev: 01.01A01 temp: 35 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 299d 6h cycles: 28 
           ID-3: /dev/sdb type: USB model: Z3-128 size: 119.24 GiB block size: physical: 4096 B logical: 512 B 
           rev: 1214 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.37 GiB size: 58.43 GiB (98.41%) used: 5.00 GiB (8.6%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /media/usb-drive raw size: 119.24 GiB size: 119.24 GiB (100.00%) used: 92.8 MiB (0.1%) fs: ntfs 
           block size: 4096 B dev: /dev/sdb1 label: N/A uuid: 000EDE8200055839 
           ID-4: /media/usb-drive2 raw size: 1.78 TiB size: 1.78 TiB (100.00%) used: 573.95 GiB (31.6%) fs: btrfs 
           block size: 4096 B dev: /dev/sda2 label: backup uuid: ab23f18c-e33a-4456-966a-fa58c9aca818 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 56.2 MiB (56.3%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/sda1 size: 976.56 GiB fs: ntfs label: Elements uuid: 344C12A74C126440 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-1:4 info: Intrinsix type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip ID: 0578:0578 
           Device-2: 2-2:2 info: Western Digital Elements / My Passport (WD20NMVW) type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 1058:25a1 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 962 lib: 503 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https://deb.nodesource.com/node_12.x buster main
           2: deb-src https://deb.nodesource.com/node_12.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 195 
           1: cpu: 6.8% command: sdb1 started by: mount.ntfs pid: 15393 mem: 2.16 MiB (0.1%) 
           2: cpu: 4.6% command: apps.plugin pid: 11959 mem: 4.54 MiB (0.2%) 
           3: cpu: 2.6% command: netdata pid: 11671 mem: 87.3 MiB (4.5%) 
           4: cpu: 1.5% command: python.d.plugin started by: python pid: 11962 mem: 17.7 MiB (0.9%) 
           5: cpu: 0.6% command: camera.js started by: node pid: 3987 mem: 52.0 MiB (2.6%) 
           Memory top: 5 of 195 
           1: mem: 162.9 MiB (8.4%) command: mysqld pid: 1017 cpu: 0.1% 
           2: mem: 87.3 MiB (4.5%) command: netdata pid: 11671 cpu: 2.6% 
           3: mem: 52.0 MiB (2.6%) command: camera.js started by: node pid: 3987 cpu: 0.6% 
           4: mem: 40.9 MiB (2.1%) command: pm2 pid: 2542 cpu: 0.5% 
           5: mem: 33.1 MiB (1.7%) command: cron.js started by: node pid: 3997 cpu: 0.0% 
Info:      Processes: 195 Uptime: 4d 18h 46m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 
           alt: 8 Shell: Storage.sh (sudo) default: Bash v: 5.0.3 inxi: 3.1.04

Benchmark #28309 - Brand: Samsung SD EVO (EC2QT)