Benchmark #27864 - pibenchmarks.com

Brand: Hitachi TravelStar 5400RPM
HDD (2.5" SATA)
#99 / 1,539
112
#995 / 1,539
#35 / 66
#4 / 20
1,618
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.sg

Overview
2020-06-23 20:45:22
#27,864
772
-846 (-109.59%)
Darren B
Hitachi Travelstar 5K1000 (HTS541075A9E680) HDD on Pi 4 using ORICO 2.5 USB 3.0 External Hard Drive Enclosure (2139U3)

Storage Details
Hitachi TravelStar 5400RPM
HDD (2.5" SATA)
750G
HDD
Hitachi
HTS541075A9E680
SATA
3.00
5,000
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
50.3 MB/s
62.97 MB/s
219.52 MB/s
234 IOPS
273 IOPS
937 KB/s
1,095 KB/s
1,417 KB/s
9,319 KB/s
460 KB/s
1,009 KB/s

inxi Results
System: Kernel: 5.4.45-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=d4f8d0fb-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: a03111 Memory: RAM: total: 930.2 MiB used: 501.4 MiB (53.9%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev tty: 100x30 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.45-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth2b8676b state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth4050770 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth41349de state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth451506c state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth53ddf66 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth5c1a9e2 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth5eb37e0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth7cc4a08 state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: veth9847146 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: veth9d7367f state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: vethf5d22ed state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 698.64 GiB used: 28.60 GiB (4.1%) ID-1: /dev/sda type: USB model: External USB3.0 drive model: HTS541075A9E680 family: Travelstar 5K1000 size: 698.64 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 6.0 Gb/s rotation: 5400 rpm rev: 0204 drive rev: JA2OA560 temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 1y 304d 7h cycles: 563 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 698.38 GiB size: 687.55 GiB (98.45%) used: 14.28 GiB (2.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 ID-3: /var/lib/docker/overlay2/1c088ad8c22ae07ade50cf78936dbab2f6fca4bd1df342ec937d182c4c7c6977/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/725ff771470632a447d41f32ba7dd85a18629b1ffbd41f1c2e6a8781d3a96dd9/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/84808d7638c21d1e1eaa591f7e29a0dad4ef717a3d67cc7c80343448508691cc/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/895a691899f019ac07920482f4ddebc711eec1d2bc02e260806aa0613c900d0e/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/8fb3df23f089da95d69f573cf8fbc6d4285de484db0079805a5259bb2e10b600/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/92bdbb32075ed87899aec459fecff738d86d456d18b6bea18ab9315566fe5c3f/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/937fdd8e976d95b929ff897c6ea5e258dfde381b6391028615f409328ee775bb/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/959e4e346c1ae7f00baac794a0bc6e360eabb8aadf9b6691e7a60d587e9e3513/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/9dac36cea802e7cdb0e609b234c3676462bec4ba003101a0d004c05642ce88bd/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-12: /var/lib/docker/overlay2/af2cd19a9f73d4e49a984ce446c84dc76b84e6d2203810ac7a8465c1046254cf/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-13: /var/lib/docker/overlay2/cf4dba813477f18317f4028e87d299b385470605b98e2102e39740113e036288/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-14: /var/lib/docker/overlay2/ec7625e7e11c984d8e9aa7b0d6a05e98804293a1f678268f42ee59593966679e/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-15: /var/lib/docker/overlay2/f09aadab88375c22dd3cd185d17701f06ef6cfb89b2c44268852720a042cc917/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-16: /var/lib/docker/overlay2/fed70840dc14efec2d46ca0b5233e26dbc9302623fe430470dc9ad956441edda/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 2.00 GiB used: 248.2 MiB (12.1%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 270 1: cpu: 5.9% command: python3 pid: 6536 mem: 103.0 MiB (12.0%) 2: cpu: 1.5% command: esphome started by: python3 pid: 8329 mem: 16.1 MiB (1.8%) 3: cpu: 0.9% command: avahi-daemon: pid: 352 mem: 1.48 MiB (0.1%) 4: cpu: 0.8% command: mdns-repeater pid: 5498 mem: 0.06 MiB (0.0%) 5: cpu: 0.6% command: dockerd pid: 681 mem: 17.5 MiB (2.0%) Memory top: 5 of 270 1: mem: 103.0 MiB (12.0%) command: python3 pid: 6536 cpu: 5.9% 2: mem: 57.6 MiB (6.7%) command: mysqld pid: 6029 cpu: 0.6% 3: mem: 28.8 MiB (3.3%) command: node pid: 3317 cpu: 0.4% 4: mem: 21.3 MiB (2.4%) command: python3 pid: 3283 cpu: 0.3% 5: mem: 17.5 MiB (2.0%) command: dockerd pid: 681 cpu: 0.6% Info: Processes: 270 Uptime: 3h 13m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

inxi Results

System:    Kernel: 5.4.45-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=d4f8d0fb-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2711 rev: a03111 
           Memory:    RAM: total: 930.2 MiB used: 501.4 MiB (53.9%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           tty: 100x30 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.45-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth2b8676b state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth4050770 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth41349de state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth451506c state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: veth53ddf66 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: veth5c1a9e2 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: veth5eb37e0 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: veth7cc4a08 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-12: veth9847146 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-13: veth9d7367f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-14: vethf5d22ed state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-15: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 698.64 GiB used: 28.60 GiB (4.1%) 
           ID-1: /dev/sda type: USB model: External USB3.0 drive model: HTS541075A9E680 
           family: Travelstar 5K1000 size: 698.64 GiB block size: physical: 4096 B logical: 512 B 
           sata: 2.6 speed: 6.0 Gb/s rotation: 5400 rpm rev: 0204 drive rev: JA2OA560 temp: 38 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 1y 304d 7h cycles: 563 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 698.38 GiB size: 687.55 GiB (98.45%) used: 14.28 GiB (2.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 
           ID-3: /var/lib/docker/overlay2/1c088ad8c22ae07ade50cf78936dbab2f6fca4bd1df342ec937d182c4c7c6977/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/725ff771470632a447d41f32ba7dd85a18629b1ffbd41f1c2e6a8781d3a96dd9/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/84808d7638c21d1e1eaa591f7e29a0dad4ef717a3d67cc7c80343448508691cc/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/895a691899f019ac07920482f4ddebc711eec1d2bc02e260806aa0613c900d0e/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/8fb3df23f089da95d69f573cf8fbc6d4285de484db0079805a5259bb2e10b600/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/92bdbb32075ed87899aec459fecff738d86d456d18b6bea18ab9315566fe5c3f/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/937fdd8e976d95b929ff897c6ea5e258dfde381b6391028615f409328ee775bb/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/959e4e346c1ae7f00baac794a0bc6e360eabb8aadf9b6691e7a60d587e9e3513/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/9dac36cea802e7cdb0e609b234c3676462bec4ba003101a0d004c05642ce88bd/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-12: /var/lib/docker/overlay2/af2cd19a9f73d4e49a984ce446c84dc76b84e6d2203810ac7a8465c1046254cf/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-13: /var/lib/docker/overlay2/cf4dba813477f18317f4028e87d299b385470605b98e2102e39740113e036288/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-14: /var/lib/docker/overlay2/ec7625e7e11c984d8e9aa7b0d6a05e98804293a1f678268f42ee59593966679e/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-15: /var/lib/docker/overlay2/f09aadab88375c22dd3cd185d17701f06ef6cfb89b2c44268852720a042cc917/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-16: /var/lib/docker/overlay2/fed70840dc14efec2d46ca0b5233e26dbc9302623fe430470dc9ad956441edda/merged raw size: N/A size: 687.55 GiB used: 14.28 GiB (2.1%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 2.00 GiB used: 248.2 MiB (12.1%) priority: -2 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 270 
           1: cpu: 5.9% command: python3 pid: 6536 mem: 103.0 MiB (12.0%) 
           2: cpu: 1.5% command: esphome started by: python3 pid: 8329 mem: 16.1 MiB (1.8%) 
           3: cpu: 0.9% command: avahi-daemon: pid: 352 mem: 1.48 MiB (0.1%) 
           4: cpu: 0.8% command: mdns-repeater pid: 5498 mem: 0.06 MiB (0.0%) 
           5: cpu: 0.6% command: dockerd pid: 681 mem: 17.5 MiB (2.0%) 
           Memory top: 5 of 270 
           1: mem: 103.0 MiB (12.0%) command: python3 pid: 6536 cpu: 5.9% 
           2: mem: 57.6 MiB (6.7%) command: mysqld pid: 6029 cpu: 0.6% 
           3: mem: 28.8 MiB (3.3%) command: node pid: 3317 cpu: 0.4% 
           4: mem: 21.3 MiB (2.4%) command: python3 pid: 3283 cpu: 0.3% 
           5: mem: 17.5 MiB (2.0%) command: dockerd pid: 681 cpu: 0.6% 
Info:      Processes: 270 Uptime: 3h 13m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.03

Benchmark #27864 - Brand: Hitachi TravelStar 5400RPM