Benchmark #27832 - pibenchmarks.com

Brand: Samsung 970 EVO
SSD (M.2 NVMe)
#73 / 1,539
142
#169 / 1,539
#163 / 875
#134 / 194
9,135
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-23 12:35:44
#27,832
2,582
-6,553 (-253.80%)
Anonymous

Storage Details
Samsung 970 EVO
SSD (M.2 NVMe)
931.5G
SSD
Samsung
SSD970EVO1TB
2.10
480
174c:2362
0x174c (ASMedia Technology Inc.)
0x2362
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
30.1 MB/s
30.37 MB/s
30.37 MB/s
3,998 IOPS
4,047 IOPS
15,993 KB/s
16,189 KB/s
10,640 KB/s
9,146 KB/s
10,627 KB/s
10,908 KB/s

inxi Results
System: Host: pi4 Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 152.4 MiB (3.8%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 158x85 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: 2001:470:8a98:0:2a7c:d907:9860:7d4c/64 type: dynamic mngtmpaddr noprefixroute scope: global IP v6: fe80::cff8:ab70:74d8:e390/64 scope: link WAN IP: 71.182.X.X Drives: Local Storage: total: 946.35 GiB used: 2.24 GiB (0.2%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: SSD 970 EVO 1TB size: 931.51 GiB block size: physical: 512 B logical: 512 B SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.58 GiB size: 14.33 GiB (98.24%) used: 2.11 GiB (14.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.9 MiB (21.0%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 ID-3: /tmp/t raw size: 931.51 GiB size: 930.39 GiB (99.88%) used: 76.7 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sda label: N/A uuid: b3777e87-6f3f-41d0-8539-9bcc6fade4f4 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:2362 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 127 1: cpu: 1.0% command: watch pid: 841 mem: 3.13 MiB (0.0%) 2: cpu: 0.6% command: init pid: 1 mem: 7.96 MiB (0.2%) 3: cpu: 0.6% command: [kworker/u8:4-events_unbound] pid: 714 mem: 0.00 MiB (0.0%) 4: cpu: 0.2% command: [kworker/u8:1-events_unbound] pid: 1777 mem: 0.00 MiB (0.0%) 5: cpu: 0.1% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 7 mem: 0.00 MiB (0.0%) Memory top: 5 of 127 1: mem: 7.96 MiB (0.2%) command: init pid: 1 cpu: 0.6% 2: mem: 6.92 MiB (0.1%) command: systemd-journald pid: 105 cpu: 0.0% 3: mem: 6.59 MiB (0.1%) command: systemd pid: 656 cpu: 0.0% 4: mem: 5.91 MiB (0.1%) command: sshd: pid: 641 cpu: 0.0% 5: mem: 5.56 MiB (0.1%) command: systemd-logind pid: 341 cpu: 0.0% Info: Processes: 127 Uptime: 12m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi2 Shell: Storage.sh (sudo) inxi: 3.1.03

inxi Results

System:    Host: pi4 Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.88 GiB used: 152.4 MiB (3.8%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 158x85 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac: XX:XX:XX:XX:XX:XX 
           IF-ID-2: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: 2001:470:8a98:0:2a7c:d907:9860:7d4c/64 type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6: fe80::cff8:ab70:74d8:e390/64 scope: link 
           WAN IP: 71.182.X.X 
Drives:    Local Storage: total: 946.35 GiB used: 2.24 GiB (0.2%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 970 EVO 1TB size: 931.51 GiB block size: physical: 512 B 
           logical: 512 B 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.58 GiB size: 14.33 GiB (98.24%) used: 2.11 GiB (14.7%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.9 MiB (21.0%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
           ID-3: /tmp/t raw size: 931.51 GiB size: 930.39 GiB (99.88%) used: 76.7 MiB (0.0%) fs: ext4 block size: 4096 B 
           dev: /dev/sda label: N/A uuid: b3777e87-6f3f-41d0-8539-9bcc6fade4f4 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: ASMedia type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 174c:2362 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 127 
           1: cpu: 1.0% command: watch pid: 841 mem: 3.13 MiB (0.0%) 
           2: cpu: 0.6% command: init pid: 1 mem: 7.96 MiB (0.2%) 
           3: cpu: 0.6% command: [kworker/u8:4-events_unbound] pid: 714 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.2% command: [kworker/u8:1-events_unbound] pid: 1777 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.1% command: [kworker/u8:0-brcmf_wq/mmc1:0001:1] pid: 7 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 127 
           1: mem: 7.96 MiB (0.2%) command: init pid: 1 cpu: 0.6% 
           2: mem: 6.92 MiB (0.1%) command: systemd-journald pid: 105 cpu: 0.0% 
           3: mem: 6.59 MiB (0.1%) command: systemd pid: 656 cpu: 0.0% 
           4: mem: 5.91 MiB (0.1%) command: sshd: pid: 641 cpu: 0.0% 
           5: mem: 5.56 MiB (0.1%) command: systemd-logind pid: 341 cpu: 0.0% 
Info:      Processes: 127 Uptime: 12m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 clang: 7.0.1-8+rpi2 
           Shell: Storage.sh (sudo) inxi: 3.1.03

Benchmark #27832 - Brand: Samsung 970 EVO