Benchmark #27604 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,539
1,343
#571 / 1,539
#550 / 875
#172 / 363
5,919
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-21 10:17:45
#27,604
7,509
+1,590 (+21.17%)
Anonymous
da

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
480G
SSD
SanDisk
SSDPLUS480GB
2.5 inch
SATA
3.00
5,000
2109:0715
0x2109
0x0715 (VL817 SATA Adaptor)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,750 (+250)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
217 MB/s
249.94 MB/s
140.97 MB/s
12,480 IOPS
19,616 IOPS
49,920 KB/s
78,467 KB/s
16,039 KB/s
20,781 KB/s
16,101 KB/s
22,424 KB/s

inxi Results
System: Host: mpozouan Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=08b500cf-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 410.7 MiB (20.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 144x38 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fd91:dab6:a2b2:1:dea6:32ff:fe5c:31cb/64 type: dynamic mngtmpaddr scope: global IP v6: fe80::dea6:32ff:fe5c:31cb/64 scope: link IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 90.186.X.X Drives: Local Storage: total: 447.13 GiB used: 68.57 GiB (15.3%) ID-1: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 480 size: 447.13 GiB block size: physical: 512 B logical: 512 B rev: UG22 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 62.00 GiB size: 60.98 GiB (98.36%) used: 4.39 GiB (7.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 70A2-8001 ID-3: /var/nextcloud/data raw size: 384.88 GiB size: 378.71 GiB (98.40%) used: 64.13 GiB (16.9%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: data uuid: d2194538-7588-ba48-aa4d-8110562fdd0c Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 2109:0715 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/grafana.list 1: deb https://packages.grafana.com/oss/deb stable main Active apt repos in: /etc/apt/sources.list.d/influxdb.list 1: deb https://repos.influxdata.com/debian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 147 1: cpu: 4.8% command: influxd pid: 408 mem: 108.0 MiB (5.5%) 2: cpu: 1.2% command: init pid: 1 mem: 8.14 MiB (0.4%) 3: cpu: 0.7% command: telegraf pid: 414 mem: 41.3 MiB (2.1%) 4: cpu: 0.6% command: apache2 pid: 585 mem: 32.4 MiB (1.6%) 5: cpu: 0.6% command: apache2 pid: 589 mem: 32.4 MiB (1.6%) Memory top: 5 of 147 1: mem: 108.0 MiB (5.5%) command: influxd pid: 408 cpu: 4.8% 2: mem: 79.3 MiB (4.0%) command: mysqld pid: 569 cpu: 0.3% 3: mem: 41.3 MiB (2.1%) command: telegraf pid: 414 cpu: 0.7% 4: mem: 37.2 MiB (1.9%) command: grafana-server pid: 623 cpu: 0.6% 5: mem: 32.6 MiB (1.6%) command: apache2 pid: 586 cpu: 0.4% Info: Processes: 147 Uptime: 5m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh inxi: 3.1.03

inxi Results

System:    Host: mpozouan Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=08b500cf-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
Memory:    RAM: total: 1.97 GiB used: 410.7 MiB (20.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: fbdev unloaded: modesetting tty: 144x38 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fd91:dab6:a2b2:1:dea6:32ff:fe5c:31cb/64 type: dynamic mngtmpaddr scope: global 
           IP v6: fe80::dea6:32ff:fe5c:31cb/64 scope: link 
           IF-ID-2: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 90.186.X.X 
Drives:    Local Storage: total: 447.13 GiB used: 68.57 GiB (15.3%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: SSD PLUS 480 size: 447.13 GiB block size: physical: 512 B 
           logical: 512 B rev: UG22 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 62.00 GiB size: 60.98 GiB (98.36%) used: 4.39 GiB (7.2%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: a1fafd2b-1ef0-4fe8-8ac1-ad33bbb48642 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.0 MiB (20.2%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: boot uuid: 70A2-8001 
           ID-3: /var/nextcloud/data raw size: 384.88 GiB size: 378.71 GiB (98.40%) used: 64.13 GiB (16.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda3 label: data uuid: d2194538-7588-ba48-aa4d-8110562fdd0c 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: VIA Labs type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s 
           chip ID: 2109:0715 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/grafana.list 
           1: deb https://packages.grafana.com/oss/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/influxdb.list 
           1: deb https://repos.influxdata.com/debian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 147 
           1: cpu: 4.8% command: influxd pid: 408 mem: 108.0 MiB (5.5%) 
           2: cpu: 1.2% command: init pid: 1 mem: 8.14 MiB (0.4%) 
           3: cpu: 0.7% command: telegraf pid: 414 mem: 41.3 MiB (2.1%) 
           4: cpu: 0.6% command: apache2 pid: 585 mem: 32.4 MiB (1.6%) 
           5: cpu: 0.6% command: apache2 pid: 589 mem: 32.4 MiB (1.6%) 
           Memory top: 5 of 147 
           1: mem: 108.0 MiB (5.5%) command: influxd pid: 408 cpu: 4.8% 
           2: mem: 79.3 MiB (4.0%) command: mysqld pid: 569 cpu: 0.3% 
           3: mem: 41.3 MiB (2.1%) command: telegraf pid: 414 cpu: 0.7% 
           4: mem: 37.2 MiB (1.9%) command: grafana-server pid: 623 cpu: 0.6% 
           5: mem: 32.6 MiB (1.6%) command: apache2 pid: 586 cpu: 0.4% 
Info:      Processes: 147 Uptime: 5m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh inxi: 3.1.03

Benchmark #27604 - Brand: SanDisk SSD Plus