Benchmark #27584 - pibenchmarks.com

Brand: Samsung 850 EVO
SSD (2.5" SATA)
#17 / 1,539
561
#444 / 1,539
#426 / 875
#97 / 363
6,521
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-21 05:58:55
#27,584
8,336
+1,815 (+21.77%)
Anonymous

Storage Details
Samsung 850 EVO
SSD (2.5" SATA)
500G
SSD
Samsung
SSD850EVO500GB
2.5 inch
SATA
3.00
5,000
1d6b:0578
0x1d6b (Linux Foundation)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
157 MB/s
65.79 MB/s
66.17 MB/s
8,637 IOPS
22,188 IOPS
34,550 KB/s
88,754 KB/s
27,259 KB/s
28,182 KB/s
23,524 KB/s
34,818 KB/s

inxi Results
System: Host: Rasp4 Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=65d4effb-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 217.0 MiB (5.4%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 178x45 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 10.50.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.50.X.X IP v6: fe80::34c3:5fb3:655c:9b66/64 scope: link WAN IP: 95.136.X.X Drives: Local Storage: total: 480.60 GiB used: 6.46 GiB (1.3%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO 500G drive model: SSD 850 EVO 500GB family: based SSDs size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s drive rev: 0301 drive rev: EMT02B6Q temp: 31 C scheme: MBR SMART: yes state: enabled health: PASSED on: 37d 10h cycles: 488 written: 3.30 TiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.58 GiB size: 14.29 GiB (98.02%) used: 6.34 GiB (44.4%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 6ead9b69-967c-4c44-ac59-11075ed8e9a7 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.0 MiB (20.6%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 016B-16E4 ID-3: /mnt/d1 raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 72.7 MiB (0.0%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 22d9145b-c57e-473b-be8e-3a41aac7dbce Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https://deb.nodesource.com/node_10.x buster main 2: deb-src https://deb.nodesource.com/node_10.x buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 125 1: cpu: 7.5% command: [w1_bus_master1] pid: 190 mem: 0.00 MiB (0.0%) 2: cpu: 0.6% command: packagekitd pid: 4779 mem: 12.4 MiB (0.3%) 3: cpu: 0.5% command: init pid: 1 mem: 8.16 MiB (0.2%) 4: cpu: 0.5% command: bash pid: 4589 mem: 2.80 MiB (0.0%) 5: cpu: 0.2% command: [kworker/0:1h-mmc_complete] pid: 84 mem: 0.00 MiB (0.0%) Memory top: 5 of 125 1: mem: 12.4 MiB (0.3%) command: packagekitd pid: 4779 cpu: 0.6% 2: mem: 11.1 MiB (0.2%) command: systemd-journald pid: 115 cpu: 0.2% 3: mem: 8.16 MiB (0.2%) command: init pid: 1 cpu: 0.5% 4: mem: 7.16 MiB (0.1%) command: systemd pid: 557 cpu: 0.0% 5: mem: 6.08 MiB (0.1%) command: sshd: pid: 551 cpu: 0.0% Info: Processes: 125 Uptime: 34m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: Storage.sh (sudo) inxi: 3.1.03

inxi Results

System:    Host: Rasp4 Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=65d4effb-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           Console: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
Memory:    RAM: total: 3.89 GiB used: 217.0 MiB (5.4%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A 
           stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 178x45 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 10.50.X.X/24 type: dynamic noprefixroute scope: global broadcast: 10.50.X.X 
           IP v6: fe80::34c3:5fb3:655c:9b66/64 scope: link 
           WAN IP: 95.136.X.X 
Drives:    Local Storage: total: 480.60 GiB used: 6.46 GiB (1.3%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B 
           scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: SSD 850 EVO 500G drive model: SSD 850 EVO 500GB family: based SSDs 
           size: 465.76 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s 
           drive rev: 0301 drive rev: EMT02B6Q temp: 31 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 37d 10h cycles: 488 written: 3.30 TiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.58 GiB size: 14.29 GiB (98.02%) used: 6.34 GiB (44.4%) fs: ext4 block size: 4096 B 
           dev: /dev/mmcblk0p2 label: rootfs uuid: 6ead9b69-967c-4c44-ac59-11075ed8e9a7 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.0 MiB (20.6%) fs: vfat block size: 512 B 
           dev: /dev/mmcblk0p1 label: boot uuid: 016B-16E4 
           ID-3: /mnt/d1 raw size: 465.76 GiB size: 457.45 GiB (98.22%) used: 72.7 MiB (0.0%) fs: ext4 block size: 4096 B 
           dev: /dev/sda1 label: N/A uuid: 22d9145b-c57e-473b-be8e-3a41aac7dbce 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https://deb.nodesource.com/node_10.x buster main
           2: deb-src https://deb.nodesource.com/node_10.x buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 125 
           1: cpu: 7.5% command: [w1_bus_master1] pid: 190 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.6% command: packagekitd pid: 4779 mem: 12.4 MiB (0.3%) 
           3: cpu: 0.5% command: init pid: 1 mem: 8.16 MiB (0.2%) 
           4: cpu: 0.5% command: bash pid: 4589 mem: 2.80 MiB (0.0%) 
           5: cpu: 0.2% command: [kworker/0:1h-mmc_complete] pid: 84 mem: 0.00 MiB (0.0%) 
           Memory top: 5 of 125 
           1: mem: 12.4 MiB (0.3%) command: packagekitd pid: 4779 cpu: 0.6% 
           2: mem: 11.1 MiB (0.2%) command: systemd-journald pid: 115 cpu: 0.2% 
           3: mem: 8.16 MiB (0.2%) command: init pid: 1 cpu: 0.5% 
           4: mem: 7.16 MiB (0.1%) command: systemd pid: 557 cpu: 0.0% 
           5: mem: 6.08 MiB (0.1%) command: sshd: pid: 551 cpu: 0.0% 
Info:      Processes: 125 Uptime: 34m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: Storage.sh (sudo) inxi: 3.1.03

Benchmark #27584 - Brand: Samsung 850 EVO