Benchmark #27373 - pibenchmarks.com

Brand: SanDisk X110 mSATA
SSD (mSATA)
#377 / 1,539
19
#477 / 1,539
#457 / 875
#22 / 69
6,348
	Amazon.com Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.se

Overview
2020-06-18 14:01:05
#27,373
2,292
-4,056 (-176.96%)
Anonymous

Storage Details
SanDisk X110 mSATA
SSD (mSATA)
64G
SSD
SanDisk
SD6SF1M064G
SATA
2.10
480
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
29.9 MB/s
28.36 MB/s
26.71 MB/s
2,380 IOPS
2,242 IOPS
9,521 KB/s
8,971 KB/s
11,064 KB/s
8,497 KB/s
9,807 KB/s
10,803 KB/s

inxi Results
System: Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d91b1e6a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 0 DM: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.5 MiB used: 441.2 MiB (44.0%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 120x30 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.66-v7+ Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: mngtmpaddr noprefixroute dynamic scope: global IP v6: scope: link IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: flags 800 scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 59.63 GiB used: 9.08 GiB (15.2%) ID-1: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 59.63 GiB block size: physical: 512 B logical: 512 B rev: 0209 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.58 GiB size: 58.39 GiB (98.01%) used: 9.06 GiB (15.5%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 5fa1ec37-3719-4b25-be14-1f7d29135a13 ID-2: /boot raw size: 43.9 MiB size: 43.8 MiB (99.76%) used: 22.5 MiB (51.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: DDAB-3A15 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.3:4 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/glennr-pi-java.list 1: deb http: //ppa.launchpad.net/webupd8team/java/ubuntu trusty main 2: deb-src http: //ppa.launchpad.net/webupd8team/java/ubuntu trusty main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ stretch main ui Active apt repos in: /etc/apt/sources.list.d/ubnt-unifi.list 1: deb http: //www.ubnt.com/downloads/unifi/debian stable ubiquiti Processes: CPU top: 5 of 166 1: cpu: 111% command: java pid: 1206 mem: 127.7 MiB (14.6%) 2: cpu: 16.9% command: unifi pid: 656 mem: 49.1 MiB (5.6%) 3: cpu: 7.7% command: [kworker/3:3-eve] pid: 70 mem: 0.00 MiB (0.0%) 4: cpu: 4.8% command: bin/mongod pid: 1585 mem: 89.9 MiB (10.2%) 5: cpu: 3.4% command: lxpanel pid: 1073 mem: 23.3 MiB (2.6%) Memory top: 5 of 166 1: mem: 127.7 MiB (14.6%) command: java pid: 1206 cpu: 111% 2: mem: 89.9 MiB (10.2%) command: bin/mongod pid: 1585 cpu: 4.8% 3: mem: 49.1 MiB (5.6%) command: unifi pid: 656 cpu: 16.9% 4: mem: 33.1 MiB (3.7%) command: xorg pid: 734 cpu: 1.8% 5: mem: 23.3 MiB (2.6%) command: lxpanel pid: 1073 cpu: 3.4% Info: Processes: 166 Uptime: 1m Init: systemd v: 232 target: graphical.target Compilers: gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.19.66-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=d91b1e6a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet splash plymouth.ignore-serial-consoles 
           Console: tty 0 DM: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.5 MiB used: 441.2 MiB (44.0%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 120x30 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.66-v7+ 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: mngtmpaddr noprefixroute dynamic scope: global 
           IP v6:  scope: link 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: flags 800 scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig 
Drives:    Local Storage: total: 59.63 GiB used: 9.08 GiB (15.2%) 
           ID-1: /dev/sda type: USB vendor: JMicron Tech model: Generic size: 59.63 GiB 
           block size: physical: 512 B logical: 512 B rev: 0209 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.58 GiB size: 58.39 GiB (98.01%) used: 9.06 GiB (15.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 5fa1ec37-3719-4b25-be14-1f7d29135a13 
           ID-2: /boot raw size: 43.9 MiB size: 43.8 MiB (99.76%) used: 22.5 MiB (51.3%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: boot uuid: DDAB-3A15 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.3:4 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/glennr-pi-java.list 
           1: deb http: //ppa.launchpad.net/webupd8team/java/ubuntu trusty main
           2: deb-src http: //ppa.launchpad.net/webupd8team/java/ubuntu trusty main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ stretch main ui
           Active apt repos in: /etc/apt/sources.list.d/ubnt-unifi.list 
           1: deb http: //www.ubnt.com/downloads/unifi/debian stable ubiquiti
Processes: CPU top: 5 of 166 
           1: cpu: 111% command: java pid: 1206 mem: 127.7 MiB (14.6%) 
           2: cpu: 16.9% command: unifi pid: 656 mem: 49.1 MiB (5.6%) 
           3: cpu: 7.7% command: [kworker/3:3-eve] pid: 70 mem: 0.00 MiB (0.0%) 
           4: cpu: 4.8% command: bin/mongod pid: 1585 mem: 89.9 MiB (10.2%) 
           5: cpu: 3.4% command: lxpanel pid: 1073 mem: 23.3 MiB (2.6%) 
           Memory top: 5 of 166 
           1: mem: 127.7 MiB (14.6%) command: java pid: 1206 cpu: 111% 
           2: mem: 89.9 MiB (10.2%) command: bin/mongod pid: 1585 cpu: 4.8% 
           3: mem: 49.1 MiB (5.6%) command: unifi pid: 656 cpu: 16.9% 
           4: mem: 33.1 MiB (3.7%) command: xorg pid: 734 cpu: 1.8% 
           5: mem: 23.3 MiB (2.6%) command: lxpanel pid: 1073 cpu: 3.4% 
Info:      Processes: 166 Uptime: 1m Init: systemd v: 232 target: graphical.target Compilers: 
           gcc: 6.3.0 alt: 6 Client: shell wrapper v: 4.4.12-release inxi: 3.1.03

Benchmark #27373 - Brand: SanDisk X110 mSATA