Benchmark #27277 - pibenchmarks.com

Seagate Momentus

Overview
2020-06-17 11:32:42
#27,277
852
Adamski
Seagate Momentus
HDD (2.5" SATA)
1000G
HDD
Seagate ST1000 HD on PI3

Device Details
Seagate
ST1000LM035-1RK172
2.5 inch
SATA
5,400
2.00
480
0bc2:2322
0x0bc2
0x2322 (SRD0NF1 Expansion Portable (STEA))
usb-storage
None

Host System Details
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
Raspbian GNU/Linux 8 (jessie)
armv7l
1,200
400
450

Benchmark Results
27.3 MB/s
25.94 MB/s
19.45 MB/s
330 IOPS
872 IOPS
1,321 KB/s
3,490 KB/s
10,467 KB/s
8,523 KB/s
4,834 KB/s
1,249 KB/s

inxi Results
System: Kernel: 4.9.35-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ea00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 Distro: Raspbian GNU/Linux 8 (jessie) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 986.9 MiB used: 646.1 MiB (65.5%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 157x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_AUD0 bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.9.35-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: scope: global broadcast: IP v6: type: noprefixroute dynamic scope: global IP v6: type: noprefixroute scope: global IP v6: scope: link IF-ID-1: wlan0 state: down mac: IP v6: virtual: tentative scope: link WAN IP: Drives: Local Storage: total: 931.51 GiB used: 3.48 GiB (0.4%) ID-1: /dev/sda type: USB vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB block size: physical: 512 B logical: 512 B rotation: 5400 rpm rev: 9300 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.51 GiB size: 58.45 GiB (98.22%) used: 2.70 GiB (4.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: N/A uuid: 0c4d535e-87fe-4778-84b8-8013143ed035 ID-2: /boot raw size: 94.0 MiB size: 92.5 MiB (98.44%) used: 20.9 MiB (22.6%) fs: vfat block size: 512 B dev: /dev/sda1 label: BOOT uuid: 945C-EFE8 ID-3: /home raw size: 871.91 GiB size: 858.10 GiB (98.42%) used: 779.5 MiB (0.1%) fs: ext4 block size: 4096 B dev: /dev/sda3 label: N/A uuid: d8d7bc11-ecbe-49ef-a4c2-7faf00db4a14 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 100.0 MiB (100.0%) priority: -1 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.4:4 info: Sigma Designs type: Abstract (modem),CDC-Data driver: cdc_acm interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 Device-3: 1-1.5:5 info: Seagate RSS LLC type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:2322 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi 2: deb http: //download.mono-project.com/repo/debian wheezy/snapshots 4.6.X.X/main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ jessie main ui Processes: CPU top: 5 of 145 1: cpu: 9.3% command: [kworker/2:1] pid: 332 mem: 0.00 MiB (0.0%) 2: cpu: 5.4% command: hspi_zwave.exe started by: mono pid: 921 mem: 30.4 MiB (3.1%) 3: cpu: 2.4% command: mono pid: 523 mem: 292.7 MiB (30.1%) 4: cpu: 0.4% command: hspi_mqtt.exe started by: mono pid: 919 mem: 113.4 MiB (11.6%) 5: cpu: 0.3% command: hspi_blbackup.exe started by: mono pid: 918 mem: 63.6 MiB (6.5%) Memory top: 5 of 145 1: mem: 292.7 MiB (30.1%) command: mono pid: 523 cpu: 2.4% 2: mem: 113.4 MiB (11.6%) command: hspi_mqtt.exe started by: mono pid: 919 cpu: 0.4% 3: mem: 63.6 MiB (6.5%) command: hspi_blbackup.exe started by: mono pid: 918 cpu: 0.3% 4: mem: 30.4 MiB (3.1%) command: hspi_zwave.exe started by: mono pid: 921 cpu: 5.4% 5: mem: 22.5 MiB (2.3%) command: java pid: 675 cpu: 0.1% Info: Processes: 145 Uptime: 80d 3h 48m Init: systemd v: 215 runlevel: 3 target: multi-user.target Compilers: gcc: 4.9.2 alt: 4.9 Client: shell wrapper v: 4.3.30-release inxi: 3.1.03

inxi Results

System:    Kernel: 4.9.35-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 
           bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ea00000 
           vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 Distro: Raspbian GNU/Linux 8 (jessie) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 986.9 MiB used: 646.1 MiB (65.5%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 600 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 157x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_AUD0 bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.9.35-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  type: noprefixroute dynamic scope: global 
           IP v6:  type: noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           IP v6:  virtual: tentative scope: link 
           WAN IP:  
Drives:    Local Storage: total: 931.51 GiB used: 3.48 GiB (0.4%) 
           ID-1: /dev/sda type: USB vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB 
           block size: physical: 512 B logical: 512 B rotation: 5400 rpm rev: 9300 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.51 GiB size: 58.45 GiB (98.22%) used: 2.70 GiB (4.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: N/A uuid: 0c4d535e-87fe-4778-84b8-8013143ed035 
           ID-2: /boot raw size: 94.0 MiB size: 92.5 MiB (98.44%) used: 20.9 MiB (22.6%) fs: vfat 
           block size: 512 B dev: /dev/sda1 label: BOOT uuid: 945C-EFE8 
           ID-3: /home raw size: 871.91 GiB size: 858.10 GiB (98.42%) used: 779.5 MiB (0.1%) 
           fs: ext4 block size: 4096 B dev: /dev/sda3 label: N/A 
           uuid: d8d7bc11-ecbe-49ef-a4c2-7faf00db4a14 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 100.0 MiB (100.0%) priority: -1 
           file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.4:4 info: Sigma Designs type: Abstract (modem),CDC-Data driver: cdc_acm 
           interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 0658:0200 
           Device-3: 1-1.5:5 info: Seagate RSS LLC type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0bc2:2322 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi
           2: deb http: //download.mono-project.com/repo/debian wheezy/snapshots 4.6.X.X/main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ jessie main ui
Processes: CPU top: 5 of 145 
           1: cpu: 9.3% command: [kworker/2:1] pid: 332 mem: 0.00 MiB (0.0%) 
           2: cpu: 5.4% command: hspi_zwave.exe started by: mono pid: 921 mem: 30.4 MiB (3.1%) 
           3: cpu: 2.4% command: mono pid: 523 mem: 292.7 MiB (30.1%) 
           4: cpu: 0.4% command: hspi_mqtt.exe started by: mono pid: 919 mem: 113.4 MiB (11.6%) 
           5: cpu: 0.3% command: hspi_blbackup.exe started by: mono pid: 918 mem: 63.6 MiB (6.5%) 
           Memory top: 5 of 145 
           1: mem: 292.7 MiB (30.1%) command: mono pid: 523 cpu: 2.4% 
           2: mem: 113.4 MiB (11.6%) command: hspi_mqtt.exe started by: mono pid: 919 cpu: 0.4% 
           3: mem: 63.6 MiB (6.5%) command: hspi_blbackup.exe started by: mono pid: 918 cpu: 0.3% 
           4: mem: 30.4 MiB (3.1%) command: hspi_zwave.exe started by: mono pid: 921 cpu: 5.4% 
           5: mem: 22.5 MiB (2.3%) command: java pid: 675 cpu: 0.1% 
Info:      Processes: 145 Uptime: 80d 3h 48m Init: systemd v: 215 runlevel: 3 
           target: multi-user.target Compilers: gcc: 4.9.2 alt: 4.9 Client: shell wrapper 
           v: 4.3.30-release inxi: 3.1.03

Benchmark #27277 - Brand: Seagate Momentus