Benchmark #26044 - pibenchmarks.com

Brand: Seagate FastSSD
SSD (Portable)
#718 / 1,539
5
#365 / 1,539
#351 / 875
#63 / 137
6,989
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-31 12:44:35
#26,044
7,290
+301 (+4.13%)
ARTC
clea

Storage Details
Seagate FastSSD
SSD (Portable)
465.8G
SSD
Seagate
FastSSD
3.00
5,000
1d6b:ab09
0x1d6b (Linux Foundation)
0xab09
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
183 MB/s
298.33 MB/s
277.34 MB/s
8,958 IOPS
18,840 IOPS
35,835 KB/s
75,363 KB/s
29,407 KB/s
26,749 KB/s
18,564 KB/s
24,635 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2ad65738-01 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles plymouth.enable=0 Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 913.5 MiB (22.9%) gpu: 128.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 93 size: 527x296mm (20.7x11.7") diag: 604mm (23.8") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 495.48 GiB used: 20.13 GiB (4.1%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Seagate model: Fast SSD size: 465.76 GiB block size: physical: 512 B logical: 512 B rev: 0002 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.76 GiB size: 458.33 GiB (98.40%) used: 20.07 GiB (4.4%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: root uuid: 339fb035-db95-48db-9e00-6bbe6e201a09 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 4741-C0A0 ID-3: /media/pi/data raw size: 512.0 MiB size: 487.9 MiB (95.30%) used: 408 KiB (0.1%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p8 label: data uuid: 1f617de9-9c23-4595-a8cf-e8ee3a3016b1 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 1024 KiB (1.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 2.20 GiB fs: vfat label: RECOVERY uuid: 6165-6162 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 5402bbc1-8733-4e6a-9a77-f1bb2c7080bf ID-4: /dev/mmcblk0p7 size: 26.73 GiB fs: ext4 label: root uuid: 339fb035-db95-48db-9e00-6bbe6e201a09 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.3.1:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 Device-2: 1-1.3.2:5 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 093a:2510 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: Seagate RSS LLC type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab09 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/headmelted_vscode.list 1: deb https: //packagecloud.io/headmelted/codebuilds/debian/ stretch main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 102% command: openshot-qt started by: python3 pid: 5834 mem: 350.1 MiB (9.0%) 2: cpu: 38.7% command: chromium-browser-v7 pid: 1101 mem: 87.0 MiB (2.2%) 3: cpu: 23.5% command: motion pid: 526 mem: 41.5 MiB (1.0%) 4: cpu: 17.7% command: chromium-browser-v7 pid: 6549 mem: 96.8 MiB (2.5%) 5: cpu: 11.3% command: chromium-browser-v7 pid: 1424 mem: 82.1 MiB (2.1%) Memory top: 5 1: mem: 350.1 MiB (9.0%) command: openshot-qt started by: python3 pid: 5834 cpu: 102% 2: mem: 150.3 MiB (3.8%) command: chromium-browser-v7 pid: 1056 cpu: 8.5% 3: mem: 96.8 MiB (2.5%) command: chromium-browser-v7 pid: 6549 cpu: 17.7% 4: mem: 87.0 MiB (2.2%) command: chromium-browser-v7 pid: 1101 cpu: 38.7% 5: mem: 84.0 MiB (2.1%) command: chromium-browser-v7 pid: 1260 cpu: 0.4% Info: Processes: 188 Uptime: 1h 44m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2ad65738-01 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles plymouth.enable=0 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 913.5 MiB (22.9%) gpu: 128.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 540 
           Speed: 750 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 750 2: 750 3: 750 4: 750 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 93 size: 527x296mm (20.7x11.7") 
           diag: 604mm (23.8") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 495.48 GiB used: 20.13 GiB (4.1%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL32G size: 29.72 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Seagate model: Fast SSD size: 465.76 GiB block size: 
           physical: 512 B logical: 512 B rev: 0002 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.76 GiB size: 458.33 GiB (98.40%) used: 20.07 GiB (4.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: root 
           uuid: 339fb035-db95-48db-9e00-6bbe6e201a09 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 4741-C0A0 
           ID-3: /media/pi/data raw size: 512.0 MiB size: 487.9 MiB (95.30%) used: 408 KiB (0.1%) 
           fs: ext4 block size: 4096 B dev: /dev/mmcblk0p8 label: data 
           uuid: 1f617de9-9c23-4595-a8cf-e8ee3a3016b1 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 1024 KiB (1.0%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.20 GiB fs: vfat label: RECOVERY uuid: 6165-6162 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 5402bbc1-8733-4e6a-9a77-f1bb2c7080bf 
           ID-4: /dev/mmcblk0p7 size: 26.73 GiB fs: ext4 label: root 
           uuid: 339fb035-db95-48db-9e00-6bbe6e201a09 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.3:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.3.1:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 
           Device-2: 1-1.3.2:5 info: Pixart Imaging Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 093a:2510 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: Seagate RSS LLC type: Mass Storage driver: uas interfaces: 1 
           rev: 3.1 speed: 5 Gb/s chip ID: 0bc2:ab09 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/headmelted_vscode.list 
           1: deb https: //packagecloud.io/headmelted/codebuilds/debian/ stretch main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 102% command: openshot-qt started by: python3 pid: 5834 mem: 350.1 MiB (9.0%) 
           2: cpu: 38.7% command: chromium-browser-v7 pid: 1101 mem: 87.0 MiB (2.2%) 
           3: cpu: 23.5% command: motion pid: 526 mem: 41.5 MiB (1.0%) 
           4: cpu: 17.7% command: chromium-browser-v7 pid: 6549 mem: 96.8 MiB (2.5%) 
           5: cpu: 11.3% command: chromium-browser-v7 pid: 1424 mem: 82.1 MiB (2.1%) 
           Memory top: 5 
           1: mem: 350.1 MiB (9.0%) command: openshot-qt started by: python3 pid: 5834 cpu: 102% 
           2: mem: 150.3 MiB (3.8%) command: chromium-browser-v7 pid: 1056 cpu: 8.5% 
           3: mem: 96.8 MiB (2.5%) command: chromium-browser-v7 pid: 6549 cpu: 17.7% 
           4: mem: 87.0 MiB (2.2%) command: chromium-browser-v7 pid: 1101 cpu: 38.7% 
           5: mem: 84.0 MiB (2.1%) command: chromium-browser-v7 pid: 1260 cpu: 0.4% 
Info:      Processes: 188 Uptime: 1h 44m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #26044 - Brand: Seagate FastSSD