Benchmark #25750 - pibenchmarks.com

Brand: Samsung SD EVO+ (GB1QT)
C10 U1
#57 / 1,539
178
#1,252 / 1,539
#226 / 369
1,033
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-28 09:07:49
#25,750
864
-169 (-19.56%)
Anonymous
q

Secure Digital (SD) Card Details
Samsung SD EVO+ (GB1QT)
C10 U1
29.6G
SD
Samsung
GB1QT
SDHC
3.00
0x1b
SM
3.0
10/2018
Class 10
None
U1
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
17.1 MB/s
21.74 MB/s
21.88 MB/s
435 IOPS
2,246 IOPS
1,741 KB/s
8,986 KB/s
7,406 KB/s
2,550 KB/s
7,373 KB/s
1,625 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=c516dbe9-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 1002.1 MiB used: 276.1 MiB (27.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 131x34 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 59.62 GiB used: 2.52 GiB (4.2%) ID-1: /dev/mmcblk0 vendor: HP model: GB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Generic model: STORAGE DEVICE size: 29.81 GiB block size: physical: 512 B logical: 512 B rev: 0272 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 29.56 GiB size: 28.97 GiB (98.01%) used: 2.47 GiB (8.5%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: N/A uuid: d0eb79f1-c010-40bd-99c3-2aac070a08f5 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: B436-8B7B Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 59.2 MiB (59.3%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 8C11-CFE8 ID-2: /dev/sda2 size: 29.56 GiB fs: ext4 label: N/A uuid: e4676ac8-2636-4a8d-85b7-7f3cc52a873a USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.2:4 info: Genesys Logic microSD Reader/Writer type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0736 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //b:3142/raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb http: //127.0.X.X:3142/deb.nodesource.com/node_10.x buster main 3: deb-src http: //127.0.X.X:3142/deb.nodesource.com/node_10.x buster main No active apt repos in: /etc/apt/sources.list.d/nodesource.list No active apt repos in: /etc/apt/sources.list.d/raspi.list Processes: CPU top: 5 1: cpu: 6.5% command: pigpiod pid: 277 mem: 1.83 MiB (0.1%) 2: cpu: 4.7% command: node-red pid: 276 mem: 87.8 MiB (9.4%) 3: cpu: 0.5% command: -bash pid: 10405 mem: 3.75 MiB (0.4%) 4: cpu: 0.4% command: sshd: pid: 10353 mem: 6.31 MiB (0.6%) 5: cpu: 0.3% command: systemd pid: 10383 mem: 7.09 MiB (0.7%) Memory top: 5 1: mem: 87.8 MiB (9.4%) command: node-red pid: 276 cpu: 4.7% 2: mem: 7.09 MiB (0.7%) command: systemd pid: 10383 cpu: 0.3% 3: mem: 6.31 MiB (0.6%) command: sshd: pid: 10353 cpu: 0.4% 4: mem: 5.43 MiB (0.5%) command: systemd-journald pid: 121 cpu: 0.0% 5: mem: 5.36 MiB (0.5%) command: init pid: 1 cpu: 0.0% Info: Processes: 123 Uptime: 2d 16h 18m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 
           root=PARTUUID=c516dbe9-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 1002.1 MiB used: 276.1 MiB (27.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 358 
           Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 131x34 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 59.62 GiB used: 2.52 GiB (4.2%) 
           ID-1: /dev/mmcblk0 vendor: HP model: GB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Generic model: STORAGE DEVICE size: 29.81 GiB 
           block size: physical: 512 B logical: 512 B rev: 0272 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 29.56 GiB size: 28.97 GiB (98.01%) used: 2.47 GiB (8.5%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: N/A 
           uuid: d0eb79f1-c010-40bd-99c3-2aac070a08f5 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: B436-8B7B 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 59.2 MiB (59.3%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: N/A uuid: 8C11-CFE8 
           ID-2: /dev/sda2 size: 29.56 GiB fs: ext4 label: N/A 
           uuid: e4676ac8-2636-4a8d-85b7-7f3cc52a873a 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.2:4 info: Genesys Logic microSD Reader/Writer type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0736 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //b:3142/raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb http: //127.0.X.X:3142/deb.nodesource.com/node_10.x buster main
           3: deb-src http: //127.0.X.X:3142/deb.nodesource.com/node_10.x buster main
           No active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           No active apt repos in: /etc/apt/sources.list.d/raspi.list 
Processes: CPU top: 5 
           1: cpu: 6.5% command: pigpiod pid: 277 mem: 1.83 MiB (0.1%) 
           2: cpu: 4.7% command: node-red pid: 276 mem: 87.8 MiB (9.4%) 
           3: cpu: 0.5% command: -bash pid: 10405 mem: 3.75 MiB (0.4%) 
           4: cpu: 0.4% command: sshd: pid: 10353 mem: 6.31 MiB (0.6%) 
           5: cpu: 0.3% command: systemd pid: 10383 mem: 7.09 MiB (0.7%) 
           Memory top: 5 
           1: mem: 87.8 MiB (9.4%) command: node-red pid: 276 cpu: 4.7% 
           2: mem: 7.09 MiB (0.7%) command: systemd pid: 10383 cpu: 0.3% 
           3: mem: 6.31 MiB (0.6%) command: sshd: pid: 10353 cpu: 0.4% 
           4: mem: 5.43 MiB (0.5%) command: systemd-journald pid: 121 cpu: 0.0% 
           5: mem: 5.36 MiB (0.5%) command: init pid: 1 cpu: 0.0% 
Info:      Processes: 123 Uptime: 2d 16h 18m Init: systemd v: 241 runlevel: 5 Compilers: 
           gcc: 8.3.0 alt: 6/8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25750 - Brand: Samsung SD EVO+ (GB1QT)