Benchmark #24187 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#71 / 1,539
153
#527 / 1,539
#507 / 875
#25 / 69
6,098
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-13 02:31:22
#24,187
7,336
+1,238 (+16.88%)
giorgio
test

Storage Details
Transcend MSA Series
SSD (mSATA)
128G
SSD
Transcend
TS128GMSA230S
SATA
3.00
5,000
1d6b:0001
0x1d6b (Linux Foundation)
0x0001 (PSX for USB Converter)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,000 (+500)
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
171 MB/s
294.81 MB/s
248.57 MB/s
6,422 IOPS
27,638 IOPS
25,688 KB/s
110,553 KB/s
31,583 KB/s
29,413 KB/s
20,082 KB/s
24,247 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait logo.nologo quiet splash plymouth.ignore-serial-consoles usbhid.mousepoll=4 Desktop: MATE 1.20.4 info: mate-panel, cairo-dock wm: marco 1.20.3 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 1.61 GiB (41.5%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1440 Speed: 2000 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: marco v: 1.20.3 driver: modesetting unloaded: fbdev display ID: :0 screens: 1 Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") s-diag: 777mm (30.6") Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2") diag: 685mm (27") OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 134.08 GiB used: 38.63 GiB (28.8%) ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Transcend model: TS128GMSA230S size: 119.24 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 118.99 GiB size: 116.62 GiB (98.01%) used: 38.58 GiB (33.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 ID-3: /snap/core/9069 raw size: 79.9 MiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A ID-4: /snap/hello-world/29 raw size: 20 KiB size: N/A (hidden?) used: N/A (hidden?) fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 15.8 MiB (15.8%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 6341-C9E5 ID-2: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: MosArt type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 062a:4106 Hub: 1-1.4:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0608 Device-2: 1-1.4.1:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:a088 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0855:0001 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/headmelted_vscode.list 1: deb https: //packagecloud.io/headmelted/codebuilds/debian/ stretch main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/sublime-text.list 1: deb https: //download.sublimetext.com/ apt/stable/ Active apt repos in: /etc/apt/sources.list.d/vscode.list 1: deb [arch=amd64 signed-by=/usr/share/keyrings/packages.microsoft.gpg] https: //packages.microsoft.com/repos/vscode stable main Processes: CPU top: 5 1: cpu: 10.4% command: xorg pid: 600 mem: 105.0 MiB (2.8%) 2: cpu: 9.3% command: chromium pid: 1646 mem: 173.8 MiB (4.6%) 3: cpu: 7.9% command: chromium pid: 1687 mem: 156.8 MiB (4.2%) 4: cpu: 5.3% command: lxterminal pid: 14297 mem: 34.7 MiB (0.9%) 5: cpu: 5.1% command: chromium pid: 11356 mem: 108.5 MiB (2.9%) Memory top: 5 1: mem: 205.9 MiB (5.5%) command: soffice.bin pid: 12654 cpu: 3.5% 2: mem: 173.8 MiB (4.6%) command: chromium pid: 1646 cpu: 9.3% 3: mem: 156.8 MiB (4.2%) command: chromium pid: 1687 cpu: 7.9% 4: mem: 153.7 MiB (4.1%) command: rslsync pid: 963 cpu: 2.2% 5: mem: 114.5 MiB (3.0%) command: chromium pid: 1723 cpu: 3.0% Info: Processes: 237 Uptime: 1h 58m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda2 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait logo.nologo quiet splash 
           plymouth.ignore-serial-consoles usbhid.mousepoll=4 
           Desktop: MATE 1.20.4 info: mate-panel, cairo-dock wm: marco 1.20.3 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 1.61 GiB (41.5%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1440 
           Speed: 2000 MHz min/max: 667/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 
           4: 2000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: marco v: 1.20.3 driver: modesetting 
           unloaded: fbdev display ID: :0 screens: 1 
           Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") 
           s-diag: 777mm (30.6") 
           Monitor-1: HDMI-1 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2") 
           diag: 685mm (27") 
           OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 134.08 GiB used: 38.63 GiB (28.8%) 
           ID-1: /dev/mmcblk0 model: SC16G size: 14.84 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Transcend model: TS128GMSA230S size: 119.24 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 118.99 GiB size: 116.62 GiB (98.01%) used: 38.58 GiB (33.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 6341-C9E5 
           ID-3: /snap/core/9069 raw size: 79.9 MiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop1 label: N/A uuid: N/A 
           ID-4: /snap/hello-world/29 raw size: 20 KiB size: N/A (hidden?) used: N/A (hidden?) 
           fs: squashfs dev: /dev/loop0 label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 15.8 MiB (15.8%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: boot uuid: 6341-C9E5 
           ID-2: /dev/mmcblk0p2 size: 14.58 GiB fs: ext4 label: rootfs 
           uuid: 80571af6-21c9-48a0-9df5-cffb60cf79af 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: MosArt type: Mouse driver: hid-generic,usbhid interfaces: 1 
           rev: 1.1 speed: 12 Mb/s chip ID: 062a:4106 
           Hub: 1-1.4:4 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0608 
           Device-2: 1-1.4.1:5 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:a088 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 0855:0001 Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/headmelted_vscode.list 
           1: deb https: //packagecloud.io/headmelted/codebuilds/debian/ stretch main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/sublime-text.list 
           1: deb https: //download.sublimetext.com/ apt/stable/
           Active apt repos in: /etc/apt/sources.list.d/vscode.list 
           1: deb [arch=amd64 signed-by=/usr/share/keyrings/packages.microsoft.gpg] https: //packages.microsoft.com/repos/vscode stable main
Processes: CPU top: 5 
           1: cpu: 10.4% command: xorg pid: 600 mem: 105.0 MiB (2.8%) 
           2: cpu: 9.3% command: chromium pid: 1646 mem: 173.8 MiB (4.6%) 
           3: cpu: 7.9% command: chromium pid: 1687 mem: 156.8 MiB (4.2%) 
           4: cpu: 5.3% command: lxterminal pid: 14297 mem: 34.7 MiB (0.9%) 
           5: cpu: 5.1% command: chromium pid: 11356 mem: 108.5 MiB (2.9%) 
           Memory top: 5 
           1: mem: 205.9 MiB (5.5%) command: soffice.bin pid: 12654 cpu: 3.5% 
           2: mem: 173.8 MiB (4.6%) command: chromium pid: 1646 cpu: 9.3% 
           3: mem: 156.8 MiB (4.2%) command: chromium pid: 1687 cpu: 7.9% 
           4: mem: 153.7 MiB (4.1%) command: rslsync pid: 963 cpu: 2.2% 
           5: mem: 114.5 MiB (3.0%) command: chromium pid: 1723 cpu: 3.0% 
Info:      Processes: 237 Uptime: 1h 58m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #24187 - Brand: Transcend MSA Series