Benchmark #20216 - pibenchmarks.com

Brand: Intenso SSDSataIII Series
SSD (2.5" SATA)
#34 / 1,539
295
#414 / 1,539
#398 / 875
#85 / 363
6,737
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-24 04:55:11
#20,216
4,063
-2,674 (-65.81%)
Frank
Intenso SSD 120GB on Pi4

Storage Details
Intenso SSDSataIII Series
SSD (2.5" SATA)
111.5G
SSD
Intenso
SSDSataIII
3.00
5,000
1d6b:0711
0x1d6b (Linux Foundation)
0x0711 (SMCWUSBT-G (no firmware))
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
88 MB/s
177.16 MB/s
168.9 MB/s
3,798 IOPS
3,401 IOPS
15,192 KB/s
13,607 KB/s
18,024 KB/s
14,442 KB/s
15,161 KB/s
17,159 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 267.1 MiB (13.3%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev tty: 128x33 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 119.26 GiB used: 11.51 GiB (9.7%) ID-1: /dev/mmcblk0 model: 2YDMP size: 7.47 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Intenso model: SSD Sata III size: 111.79 GiB block size: physical: 512 B logical: 512 B rev: S080 scheme: MBR SMART Message: A mandatory SMART command failed. Various possible causes. Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 5.74 GiB (5.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-4: /media/pi/rootfs raw size: 7.21 GiB size: 7.04 GiB (97.57%) used: 5.67 GiB (80.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 0.3% command: packagekitd pid: 2318 mem: 13.0 MiB (0.6%) 2: cpu: 0.1% command: -bash pid: 2114 mem: 3.84 MiB (0.1%) 3: cpu: 0.1% command: bash pid: 2169 mem: 2.71 MiB (0.1%) 4: cpu: 0.0% command: init pid: 1 mem: 8.11 MiB (0.4%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 45.3 MiB (2.3%) command: xorg pid: 477 cpu: 0.0% 2: mem: 29.3 MiB (1.5%) command: lxpanel pid: 606 cpu: 0.0% 3: mem: 22.1 MiB (1.1%) command: pcmanfm pid: 607 cpu: 0.0% 4: mem: 14.9 MiB (0.7%) command: openbox pid: 601 cpu: 0.0% 5: mem: 13.0 MiB (0.6%) command: packagekitd pid: 2318 cpu: 0.3% Info: Processes: 164 Uptime: 18h 11m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:1920x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Console: tty 1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 267.1 MiB (13.3%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           tty: 128x33 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 119.26 GiB used: 11.51 GiB (9.7%) 
           ID-1: /dev/mmcblk0 model: 2YDMP size: 7.47 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Intenso model: SSD Sata III size: 111.79 GiB 
           block size: physical: 512 B logical: 512 B rev: S080 scheme: MBR 
           SMART Message: A mandatory SMART command failed. Various possible causes. 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.74 GiB (98.39%) used: 5.74 GiB (5.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9969-E3D2 
           ID-3: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot 
           uuid: 9969-E3D2 
           ID-4: /media/pi/rootfs raw size: 7.21 GiB size: 7.04 GiB (97.57%) 
           used: 5.67 GiB (80.6%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: VIA Labs type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 3.0 speed: 5 Gb/s chip ID: 2109:0711 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 0.3% command: packagekitd pid: 2318 mem: 13.0 MiB (0.6%) 
           2: cpu: 0.1% command: -bash pid: 2114 mem: 3.84 MiB (0.1%) 
           3: cpu: 0.1% command: bash pid: 2169 mem: 2.71 MiB (0.1%) 
           4: cpu: 0.0% command: init pid: 1 mem: 8.11 MiB (0.4%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 45.3 MiB (2.3%) command: xorg pid: 477 cpu: 0.0% 
           2: mem: 29.3 MiB (1.5%) command: lxpanel pid: 606 cpu: 0.0% 
           3: mem: 22.1 MiB (1.1%) command: pcmanfm pid: 607 cpu: 0.0% 
           4: mem: 14.9 MiB (0.7%) command: openbox pid: 601 cpu: 0.0% 
           5: mem: 13.0 MiB (0.6%) command: packagekitd pid: 2318 cpu: 0.3% 
Info:      Processes: 164 Uptime: 18h 11m Init: systemd v: 241 runlevel: 5 
           target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper 
           v: 5.0.3-release inxi: 3.1.00

Benchmark #20216 - Brand: Intenso SSDSataIII Series