Benchmark #19709 - pibenchmarks.com

Brand: Transcend MSA Series
SSD (mSATA)
#71 / 1,539
153
#527 / 1,539
#507 / 875
#25 / 69
6,098
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-21 10:41:32
#19,709
2,745
-3,353 (-122.15%)
Anonymous

Storage Details
Transcend MSA Series
SSD (mSATA)
64G
SSD
Transcend
TS64GMSA370
SATA
2.00
480
045b:0229
0x045b (Hitachi, Ltd)
0x0229
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B+ 1.3
Raspberry Pi 3 Model B Plus Rev 1.3
Raspberry Pi Foundation
1,400
400
450 (-50)

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
33 MB/s
27.73 MB/s
26 MB/s
3,417 IOPS
2,792 IOPS
13,669 KB/s
11,171 KB/s
12,004 KB/s
11,553 KB/s
10,888 KB/s
12,835 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 rev: a020d3 Memory: RAM: total: 991.6 MiB used: 93.2 MiB (9.4%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 1400 MHz min/max: 300/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 162x61 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 chip ID: 0424:7800 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: scope: global broadcast: WAN IP: Drives: Local Storage: total: 59.63 GiB used: 2.74 GiB (4.6%) ID-1: /dev/sda type: USB vendor: Transcend model: TS64GMSA 370 drive model: TS64GMSA370 family: based SSDs size: 59.63 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: P122 temp: 44 C scheme: MBR SMART: yes state: enabled health: PASSED on: 23d 20h cycles: 183 read: 24.88 GiB written: 617.00 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.37 GiB size: 58.43 GiB (98.41%) used: 2.69 GiB (4.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 5203-DB74 Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s chip ID: 0424:2514 Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 Device-2: 1-1.1.3:4 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb https: //archive.raspberrypi.org/debian/ buster main ui Processes: CPU top: 5 1: cpu: 8.3% command: [kworker/2:3-events_freezable] pid: 3668 mem: 0.00 MiB (0.0%) 2: cpu: 6.3% command: [kworker/2:0-memcg_kmem_cache] pid: 2501 mem: 0.00 MiB (0.0%) 3: cpu: 4.6% command: [kworker/2:2-events] pid: 67 mem: 0.00 MiB (0.0%) 4: cpu: 1.5% command: [kworker/2:1-mm_percpu_wq] pid: 33 mem: 0.00 MiB (0.0%) 5: cpu: 0.7% command: init pid: 1 mem: 7.79 MiB (0.7%) Memory top: 5 1: mem: 15.2 MiB (1.5%) command: fail2ban-server started by: python3 pid: 414 cpu: 0.4% 2: mem: 12.3 MiB (1.2%) command: unattended-upgrade-shutdown started by: python3 pid: 413 cpu: 0.1% 3: mem: 7.79 MiB (0.7%) command: init pid: 1 cpu: 0.7% 4: mem: 6.03 MiB (0.6%) command: sshd: pid: 2386 cpu: 0.5% 5: mem: 5.91 MiB (0.6%) command: systemd-journald pid: 102 cpu: 0.0% Info: Processes: 101 Uptime: 7m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 
           bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.3 details: BCM2835 
           rev: a020d3 Memory:    RAM: total: 991.6 MiB used: 93.2 MiB (9.4%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 
           Speed: 1400 MHz min/max: 300/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 
           4: 1400 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 162x61 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Device-1: Standard Microsystems type: USB driver: lan78xx bus ID: 1-1.1.1:5 
           chip ID: 0424:7800 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 59.63 GiB used: 2.74 GiB (4.6%) 
           ID-1: /dev/sda type: USB vendor: Transcend model: TS64GMSA 370 drive model: TS64GMSA370 
           family: based SSDs size: 59.63 GiB block size: physical: 512 B logical: 512 B sata: 3.1 
           speed: 6.0 Gb/s rev: P122 temp: 44 C 
           scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 23d 20h cycles: 183 read: 24.88 GiB 
           written: 617.00 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.37 GiB size: 58.43 GiB (98.41%) used: 2.69 GiB (4.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 5203-DB74 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems USB 2.0 Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Hub: 1-1.1:3 info: Standard Microsystems USB 2.0 Hub ports: 3 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:2514 
           Device-1: 1-1.1.1:5 info: Standard Microsystems type: Network driver: lan78xx 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0424:7800 
           Device-2: 1-1.1.3:4 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage 
           driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 045b:0229 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb https: //archive.raspberrypi.org/debian/ buster main ui
Processes: CPU top: 5 
           1: cpu: 8.3% command: [kworker/2:3-events_freezable] pid: 3668 mem: 0.00 MiB (0.0%) 
           2: cpu: 6.3% command: [kworker/2:0-memcg_kmem_cache] pid: 2501 mem: 0.00 MiB (0.0%) 
           3: cpu: 4.6% command: [kworker/2:2-events] pid: 67 mem: 0.00 MiB (0.0%) 
           4: cpu: 1.5% command: [kworker/2:1-mm_percpu_wq] pid: 33 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.7% command: init pid: 1 mem: 7.79 MiB (0.7%) 
           Memory top: 5 
           1: mem: 15.2 MiB (1.5%) command: fail2ban-server started by: python3 pid: 414 cpu: 0.4% 
           2: mem: 12.3 MiB (1.2%) command: unattended-upgrade-shutdown started by: python3 
           pid: 413 cpu: 0.1% 
           3: mem: 7.79 MiB (0.7%) command: init pid: 1 cpu: 0.7% 
           4: mem: 6.03 MiB (0.6%) command: sshd: pid: 2386 cpu: 0.5% 
           5: mem: 5.91 MiB (0.6%) command: systemd-journald pid: 102 cpu: 0.0% 
Info:      Processes: 101 Uptime: 7m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #19709 - Brand: Transcend MSA Series