Benchmark #16458 - pibenchmarks.com

Brand: PNY SD High Performance (SD16G)
C10 U3
#116 / 1,539
97
#1,355 / 1,539
#281 / 369
720
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-10 14:53:50
#16,458
594
-126 (-21.21%)
Anonymous
Inc2020_SD

Secure Digital (SD) Card Details
PNY SD High Performance (SD16G)
C10 U3
14.7G
SD
PNY
SD16G
SDHC
4.00
0x27
PH
3.0
03/2016
Class 10
None
U3
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
24.7 MB/s
38.88 MB/s
38.6 MB/s
56 IOPS
1,353 IOPS
227 KB/s
5,414 KB/s
4,068 KB/s
820 KB/s
5,005 KB/s
397 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait plymouth.enable=0 Console: tty 4 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: b03112 Memory: RAM: total: 1.97 GiB used: 363.2 MiB (18.0%) gpu: 64.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 144x36 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 44.25 GiB used: 3.46 GiB (7.8%) ID-1: /dev/mmcblk0 model: SD16G size: 14.92 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: sobetter EXT drive model: SSD 32GB size: 29.33 GiB block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 3202 drive rev: Q0407A temp: 32 C scheme: MBR SMART: yes state: enabled health: PASSED on: 5d 6h cycles: 578 read: 6.5 MiB written: 11.7 MiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 14.66 GiB size: 14.37 GiB (98.02%) used: 3.41 GiB (23.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: incred2020 uuid: b464e0d3-c810-4251-9beb-4aab883c02aa ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 4217-3EC7 Unmounted: ID-1: /dev/sda1 size: 4.83 GiB fs: ext4 label: incred2020 uuid: b464e0d3-c810-4251-9beb-4aab883c02aa USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https: //deb.nodesource.com/node_11.x buster main 2: deb-src https: //deb.nodesource.com/node_11.x buster main Active apt repos in: /etc/apt/sources.list.d/php.list 1: deb https: //packages.sury.org/php/ buster main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.4% command: mysqld pid: 721 mem: 81.9 MiB (4.1%) 2: cpu: 0.8% command: asterisk pid: 1199 mem: 51.3 MiB (2.6%) 3: cpu: 0.4% command: init pid: 1 mem: 8.08 MiB (0.4%) 4: cpu: 0.2% command: fail2ban-server started by: python3 pid: 504 mem: 15.1 MiB (0.7%) 5: cpu: 0.2% command: pm2 pid: 1337 mem: 35.4 MiB (1.8%) Memory top: 5 1: mem: 81.9 MiB (4.1%) command: mysqld pid: 721 cpu: 1.4% 2: mem: 51.3 MiB (2.6%) command: asterisk pid: 1199 cpu: 0.8% 3: mem: 42.2 MiB (2.1%) command: index.js started by: node pid: 1502 cpu: 0.2% 4: mem: 35.4 MiB (1.8%) command: pm2 pid: 1337 cpu: 0.2% 5: mem: 23.2 MiB (1.1%) command: apache2 pid: 763 cpu: 0.0% Info: Processes: 155 Uptime: 25m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           plymouth.enable=0 
           Console: tty 4 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: b03112 
           Memory:    RAM: total: 1.97 GiB used: 363.2 MiB (18.0%) gpu: 64.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 144x36 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 44.25 GiB used: 3.46 GiB (7.8%) 
           ID-1: /dev/mmcblk0 model: SD16G size: 14.92 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: sobetter EXT drive model: SSD 32GB size: 29.33 GiB 
           block size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 3202 drive rev: Q0407A temp: 32 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 5d 6h cycles: 578 read: 6.5 MiB 
           written: 11.7 MiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 14.66 GiB size: 14.37 GiB (98.02%) used: 3.41 GiB (23.7%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: incred2020 
           uuid: b464e0d3-c810-4251-9beb-4aab883c02aa 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.1 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 4217-3EC7 
Unmounted: ID-1: /dev/sda1 size: 4.83 GiB fs: ext4 label: incred2020 
           uuid: b464e0d3-c810-4251-9beb-4aab883c02aa 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https: //deb.nodesource.com/node_11.x buster main
           2: deb-src https: //deb.nodesource.com/node_11.x buster main
           Active apt repos in: /etc/apt/sources.list.d/php.list 
           1: deb https: //packages.sury.org/php/ buster main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.4% command: mysqld pid: 721 mem: 81.9 MiB (4.1%) 
           2: cpu: 0.8% command: asterisk pid: 1199 mem: 51.3 MiB (2.6%) 
           3: cpu: 0.4% command: init pid: 1 mem: 8.08 MiB (0.4%) 
           4: cpu: 0.2% command: fail2ban-server started by: python3 pid: 504 mem: 15.1 MiB (0.7%) 
           5: cpu: 0.2% command: pm2 pid: 1337 mem: 35.4 MiB (1.8%) 
           Memory top: 5 
           1: mem: 81.9 MiB (4.1%) command: mysqld pid: 721 cpu: 1.4% 
           2: mem: 51.3 MiB (2.6%) command: asterisk pid: 1199 cpu: 0.8% 
           3: mem: 42.2 MiB (2.1%) command: index.js started by: node pid: 1502 cpu: 0.2% 
           4: mem: 35.4 MiB (1.8%) command: pm2 pid: 1337 cpu: 0.2% 
           5: mem: 23.2 MiB (1.1%) command: apache2 pid: 763 cpu: 0.0% 
Info:      Processes: 155 Uptime: 25m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #16458 - Brand: PNY SD High Performance (SD16G)