Benchmark #15177 - pibenchmarks.com

Brand: OCZ Vertex 2 Series
SSD (2.5" SATA)
#245 / 1,539
39
#653 / 1,539
#629 / 875
#215 / 363
5,486
	Amazon.com AliExpress Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.sg

Overview
2020-04-07 12:34:51
#15,177
6,655
+1,169 (+17.57%)
mod
OCZ Vertex 2 on RPi4

Storage Details
OCZ Vertex 2 Series
SSD (2.5" SATA)
120G
SSD
OCZ
VERTEX2
Serial
3.00
5,000
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
148 MB/s
221.3 MB/s
228.42 MB/s
6,018 IOPS
9,102 IOPS
24,072 KB/s
36,408 KB/s
29,959 KB/s
24,624 KB/s
23,018 KB/s
27,075 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 361.9 MiB (9.1%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 125x51 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 119.19 GiB used: 2.52 GiB (2.1%) ID-1: /dev/mmcblk0 model: SU08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A drive vendor: OCZ drive model: VERTEX2 family: Driven SSDs size: 111.79 GiB block size: physical: 4096 B logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 0407 drive rev: 1.37 temp: 30 C scheme: MBR SMART: yes state: enabled health: PASSED on: 368d 20h cycles: 3564 read: 14976 GiB written: 6976 GiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 7.14 GiB size: 7.00 GiB (98.04%) used: 2.46 GiB (35.2%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B Unmounted: ID-1: /dev/mmcblk0p2 size: 7.14 GiB fs: ext4 label: rootfs uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/openhab2.list 1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 22.3% command: java pid: 532 mem: 194.5 MiB (4.9%) 2: cpu: 1.5% command: init pid: 1 mem: 7.89 MiB (0.1%) 3: cpu: 0.7% command: frontail started by: node pid: 533 mem: 43.2 MiB (1.0%) 4: cpu: 0.6% command: bash pid: 2131 mem: 2.76 MiB (0.0%) 5: cpu: 0.5% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 194.5 MiB (4.9%) command: java pid: 532 cpu: 22.3% 2: mem: 43.2 MiB (1.0%) command: frontail started by: node pid: 533 cpu: 0.7% 3: mem: 15.9 MiB (0.4%) command: smbd pid: 604 cpu: 0.1% 4: mem: 15.5 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 530 cpu: 0.1% 5: mem: 12.2 MiB (0.3%) command: packagekitd pid: 1357 cpu: 0.0% Info: Processes: 134 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 361.9 MiB (9.1%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 720 
           Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 125x51 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 119.19 GiB used: 2.52 GiB (2.1%) 
           ID-1: /dev/mmcblk0 model: SU08G size: 7.40 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: JMicron Tech model: N/A drive vendor: OCZ 
           drive model: VERTEX2 family: Driven SSDs size: 111.79 GiB block size: physical: 4096 B 
           logical: 512 B sata: 2.6 speed: 3.0 Gb/s rev: 0407 drive rev: 1.37 temp: 30 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 368d 20h cycles: 3564 read: 14976 GiB 
           written: 6976 GiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 7.14 GiB size: 7.00 GiB (98.04%) used: 2.46 GiB (35.2%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: F661-303B 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.14 GiB fs: ext4 label: rootfs 
           uuid: 8d008fde-f12a-47f7-8519-197ea707d3d4 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: F661-303B 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:0578 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/openhab2.list 
           1: deb https: //dl.bintray.com/openhab/apt-repo2 stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 22.3% command: java pid: 532 mem: 194.5 MiB (4.9%) 
           2: cpu: 1.5% command: init pid: 1 mem: 7.89 MiB (0.1%) 
           3: cpu: 0.7% command: frontail started by: node pid: 533 mem: 43.2 MiB (1.0%) 
           4: cpu: 0.6% command: bash pid: 2131 mem: 2.76 MiB (0.0%) 
           5: cpu: 0.5% command: [kworker/u8:1-events_unbound] pid: 45 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 194.5 MiB (4.9%) command: java pid: 532 cpu: 22.3% 
           2: mem: 43.2 MiB (1.0%) command: frontail started by: node pid: 533 cpu: 0.7% 
           3: mem: 15.9 MiB (0.4%) command: smbd pid: 604 cpu: 0.1% 
           4: mem: 15.5 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 530 cpu: 0.1% 
           5: mem: 12.2 MiB (0.3%) command: packagekitd pid: 1357 cpu: 0.0% 
Info:      Processes: 134 Uptime: 3m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #15177 - Brand: OCZ Vertex 2 Series