Benchmark #14912 - pibenchmarks.com

Brand: SanDisk SSD Plus
SSD (2.5" SATA)
#2 / 1,539
1,343
#571 / 1,539
#550 / 875
#172 / 363
5,919
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-05 14:42:19
#14,912
6,399
+480 (+7.50%)
Anonymous
Kingston SDSSDA 256GB On Pi4 using Unbranded Sata Adapter I found in China

Storage Details
SanDisk SSD Plus
SSD (2.5" SATA)
240G
SSD
SanDisk
SSDPLUS240GB
2.5 inch
SATA
3.00
5,000
1d6b:a001
0x1d6b (Linux Foundation)
0xa001 (JMS578 based SATA bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,200 (+700)
500
1,600

Operating System

Debian GNU/Linux bullseye/sid
aarch64

Benchmark Results
160 MB/s
70.47 MB/s
291.38 MB/s
11,434 IOPS
10,153 IOPS
45,739 KB/s
40,614 KB/s
17,737 KB/s
19,695 KB/s
17,662 KB/s
21,312 KB/s

inxi Results
System: Kernel: 4.19.89-v8-b85f76a63d5f-p4+ aarch64 bits: 64 compiler: gcc v: 8.3.0 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=824dbd25-06 rootfstype=ext4 elevator=deadline rootwait Console: tty 0 dm: N/A Distro: Debian GNU/Linux bullseye/sid Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 Plus charge: Full status: Discharging Memory: RAM: total: 3.77 GiB used: 859.9 MiB (22.3%) RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 629 MHz min/max: 629/2200 MHz Core speeds (MHz): 1: 629 2: 629 3: 629 4: 629 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 118x43 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 253.39 GiB used: 1.82 GiB (0.7%) ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB model: TO Exter nal USB 3.0 drive model: SSD PLUS 240GB family: Marvell based SSDs size: 223.58 GiB block size: physical: 4096 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0202 drive rev: UF4500RL temp: 38 C scheme: MBR SMART: yes state: enabled health: PASSED on: 36d 13h cycles: 1136 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 223.48 GiB size: 219.85 GiB (98.37%) used: 1.78 GiB (0.8%) fs: ext4 block size: 4096 B dev: /dev/sda6 label: root uuid: bce767dd-cd32-43f1-9d91-f277b44943a0 ID-2: /boot raw size: 84.0 MiB size: 82.7 MiB (98.44%) used: 37.4 MiB (45.2%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 5E83-1E9E Unmounted: ID-1: /dev/mmcblk0p1 size: 779.1 MiB fs: vfat label: RECOVERY uuid: FAC0-C07E ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 457e7f8c-6a7b-4440-a321-194e06e78373 ID-4: /dev/sda1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 6944-D54E ID-5: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-6: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 9de93d93-834a-4e76-9e56-c2543acef9e4 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-2: 2-2:2 info: Assmann Electronic Digitus DA-71114 SATA type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0080:a001 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //deb.debian.org/debian/ buster main contrib non-free 2: deb http: //deb.debian.org/debian/ buster-updates main contrib non-free 3: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free 4: deb http: //ftp.debian.org/debian buster-backports main 5: deb http: //ftp.us.debian.org/debian sid main Processes: CPU top: 5 1: cpu: 119% command: java pid: 612 mem: 723.2 MiB (18.7%) 2: cpu: 0.4% command: init pid: 1 mem: 9.40 MiB (0.2%) 3: cpu: 0.3% command: smartd pid: 1638 mem: 4.85 MiB (0.1%) 4: cpu: 0.2% command: systemd-journald pid: 112 mem: 7.98 MiB (0.2%) 5: cpu: 0.1% command: systemd-logind pid: 334 mem: 6.30 MiB (0.1%) Memory top: 5 1: mem: 723.2 MiB (18.7%) command: java pid: 612 cpu: 119% 2: mem: 9.40 MiB (0.2%) command: init pid: 1 cpu: 0.4% 3: mem: 7.98 MiB (0.2%) command: systemd-journald pid: 112 cpu: 0.2% 4: mem: 7.42 MiB (0.1%) command: systemd pid: 590 cpu: 0.0% 5: mem: 6.87 MiB (0.1%) command: sshd: pid: 480 cpu: 0.0% Info: Processes: 117 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A Client: shell wrapper v: 5.0.16-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.89-v8-b85f76a63d5f-p4+ aarch64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 
           root=PARTUUID=824dbd25-06 rootfstype=ext4 elevator=deadline rootwait 
           Console: tty 0 dm: N/A Distro: Debian GNU/Linux bullseye/sid 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Battery:   Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 Plus 
           charge: Full status: Discharging 
Memory:    RAM: total: 3.77 GiB used: 859.9 MiB (22.3%) 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 
           family: 8 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 629 MHz min/max: 629/2200 MHz Core speeds (MHz): 1: 629 2: 629 3: 629 4: 629 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 118x43 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 253.39 GiB used: 1.82 GiB (0.7%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB model: TO Exter nal USB 3.0 drive model: SSD PLUS 240GB 
           family: Marvell based SSDs size: 223.58 GiB block size: physical: 4096 B logical: 512 B 
           sata: 3.2 speed: 6.0 Gb/s rev: 0202 
           drive rev: UF4500RL temp: 38 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 36d 13h cycles: 1136 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 223.48 GiB size: 219.85 GiB (98.37%) used: 1.78 GiB (0.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda6 label: root 
           uuid: bce767dd-cd32-43f1-9d91-f277b44943a0 
           ID-2: /boot raw size: 84.0 MiB size: 82.7 MiB (98.44%) used: 37.4 MiB (45.2%) fs: vfat 
           block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 5E83-1E9E 
Unmounted: ID-1: /dev/mmcblk0p1 size: 779.1 MiB fs: vfat label: RECOVERY uuid: FAC0-C07E 
           ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-3: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 457e7f8c-6a7b-4440-a321-194e06e78373 
           ID-4: /dev/sda1 size: 63.0 MiB fs: vfat label: RECOVERY uuid: 6944-D54E 
           ID-5: /dev/sda2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-6: /dev/sda5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 9de93d93-834a-4e76-9e56-c2543acef9e4 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-2: 2-2:2 info: Assmann Electronic Digitus DA-71114 SATA type: Mass Storage 
           driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 0080:a001 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //deb.debian.org/debian/ buster main contrib non-free
           2: deb http: //deb.debian.org/debian/ buster-updates main contrib non-free
           3: deb http: //deb.debian.org/debian-security buster/updates main contrib non-free
           4: deb http: //ftp.debian.org/debian buster-backports main
           5: deb http: //ftp.us.debian.org/debian sid main
Processes: CPU top: 5 
           1: cpu: 119% command: java pid: 612 mem: 723.2 MiB (18.7%) 
           2: cpu: 0.4% command: init pid: 1 mem: 9.40 MiB (0.2%) 
           3: cpu: 0.3% command: smartd pid: 1638 mem: 4.85 MiB (0.1%) 
           4: cpu: 0.2% command: systemd-journald pid: 112 mem: 7.98 MiB (0.2%) 
           5: cpu: 0.1% command: systemd-logind pid: 334 mem: 6.30 MiB (0.1%) 
           Memory top: 5 
           1: mem: 723.2 MiB (18.7%) command: java pid: 612 cpu: 119% 
           2: mem: 9.40 MiB (0.2%) command: init pid: 1 cpu: 0.4% 
           3: mem: 7.98 MiB (0.2%) command: systemd-journald pid: 112 cpu: 0.2% 
           4: mem: 7.42 MiB (0.1%) command: systemd pid: 590 cpu: 0.0% 
           5: mem: 6.87 MiB (0.1%) command: sshd: pid: 480 cpu: 0.0% 
Info:      Processes: 117 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: N/A 
           Client: shell wrapper v: 5.0.16-release inxi: 3.0.38

Benchmark #14912 - Brand: SanDisk SSD Plus