Benchmark #14541 - pibenchmarks.com

Brand: SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
#16 / 1,539
568
#1,087 / 1,539
#96 / 369
1,347
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-02 13:24:51
#14,541
1,426
+79 (+5.54%)
Anonymous
Pi SD

Secure Digital (SD) Card Details
SanDisk SD Extreme A2 (SN64G)
A2 C10 V30 U3
59.2G
SD
SanDisk
SN64G
SDXC
6.00
0x03
SD
8.0
01/2020
Class 10
A2
U3
V30

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600
50

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
35.8 MB/s
38.74 MB/s
36.44 MB/s
1,127 IOPS
2,512 IOPS
4,511 KB/s
10,050 KB/s
10,275 KB/s
2,648 KB/s
7,866 KB/s
4,114 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TERMINAL = "iTerm2", LC_CTYPE = "UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.88 GiB used: 493.7 MiB (12.4%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 478x106 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: br-26390c0df822 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-4: veth6c39448 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth93bc435 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: vetha4d4376 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: vethaff2028 state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 525.24 GiB used: 15.23 GiB (2.9%) ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: Portable SSD T5 size: 465.76 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 7.59 GiB (13.0%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.2 MiB (21.1%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /var/lib/docker/overlay2/40d056dbac9c35f43faf1961e023c0f473a14fa6ce0d160322b1e32b2a9acf2b/merged raw size: N/A size: 58.28 GiB used: 7.59 GiB (13.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/568cbd72e1499e6e1b1a778a964c9cd457a644133daecca585da45655bf0708d/merged raw size: N/A size: 58.28 GiB used: 7.59 GiB (13.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/829d95546598119020bddcc14ab5924b4c05a2eab46f2f7f7d8488a807ba556e/merged raw size: N/A size: 58.28 GiB used: 7.59 GiB (13.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/8cdff69ac3a8c725622f99f27b38786453056b673af12ca416c6957ac0a4ab19/merged raw size: N/A size: 58.28 GiB used: 7.59 GiB (13.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/ac8d5cd662301f1dd1b4d4581e55d83a5063d05591688cdec6e5444ca83255ff/merged raw size: N/A size: 58.28 GiB used: 7.59 GiB (13.0%) fs: overlay source: ERR-102 label: N/A uuid: N/A Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 ID-2: /dev/sda2 size: 59.22 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: Samsung Portable SSD T5 type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 04e8:61f5 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 21.9% command: python3 pid: 3709 mem: 123.3 MiB (3.1%) 2: cpu: 3.0% command: influxd pid: 1605 mem: 45.8 MiB (1.1%) 3: cpu: 1.5% command: dockerd pid: 542 mem: 68.0 MiB (1.7%) 4: cpu: 0.6% command: init pid: 1 mem: 8.21 MiB (0.2%) 5: cpu: 0.4% command: containerd pid: 540 mem: 34.3 MiB (0.8%) Memory top: 5 1: mem: 123.3 MiB (3.1%) command: python3 pid: 3709 cpu: 21.9% 2: mem: 68.0 MiB (1.7%) command: dockerd pid: 542 cpu: 1.5% 3: mem: 45.8 MiB (1.1%) command: influxd pid: 1605 cpu: 3.0% 4: mem: 37.9 MiB (0.9%) command: node pid: 1211 cpu: 0.0% 5: mem: 34.3 MiB (0.8%) command: containerd pid: 540 cpu: 0.4% Info: Processes: 160 Uptime: 33m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_TERMINAL = "iTerm2",
	LC_CTYPE = "UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M 
           video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 1 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.88 GiB used: 493.7 MiB (12.4%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 478x106 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: br-26390c0df822 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth6c39448 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth93bc435 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: vetha4d4376 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: vethaff2028 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 525.24 GiB used: 15.23 GiB (2.9%) 
           ID-1: /dev/mmcblk0 model: SN64G size: 59.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: Portable SSD T5 size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 59.22 GiB size: 58.28 GiB (98.41%) used: 7.59 GiB (13.0%) fs: ext4 
           block size: 4096 B dev: /dev/mmcblk0p2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.2 MiB (21.1%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /var/lib/docker/overlay2/40d056dbac9c35f43faf1961e023c0f473a14fa6ce0d160322b1e32b2a9acf2b/merged raw size: N/A size: 58.28 GiB used: 7.59 GiB (13.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/568cbd72e1499e6e1b1a778a964c9cd457a644133daecca585da45655bf0708d/merged raw size: N/A size: 58.28 GiB used: 7.59 GiB (13.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/829d95546598119020bddcc14ab5924b4c05a2eab46f2f7f7d8488a807ba556e/merged raw size: N/A size: 58.28 GiB used: 7.59 GiB (13.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/8cdff69ac3a8c725622f99f27b38786453056b673af12ca416c6957ac0a4ab19/merged raw size: N/A size: 58.28 GiB used: 7.59 GiB (13.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/ac8d5cd662301f1dd1b4d4581e55d83a5063d05591688cdec6e5444ca83255ff/merged raw size: N/A size: 58.28 GiB used: 7.59 GiB (13.0%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Unmounted: ID-1: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
           ID-2: /dev/sda2 size: 59.22 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: Samsung Portable SSD T5 type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 04e8:61f5 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 21.9% command: python3 pid: 3709 mem: 123.3 MiB (3.1%) 
           2: cpu: 3.0% command: influxd pid: 1605 mem: 45.8 MiB (1.1%) 
           3: cpu: 1.5% command: dockerd pid: 542 mem: 68.0 MiB (1.7%) 
           4: cpu: 0.6% command: init pid: 1 mem: 8.21 MiB (0.2%) 
           5: cpu: 0.4% command: containerd pid: 540 mem: 34.3 MiB (0.8%) 
           Memory top: 5 
           1: mem: 123.3 MiB (3.1%) command: python3 pid: 3709 cpu: 21.9% 
           2: mem: 68.0 MiB (1.7%) command: dockerd pid: 542 cpu: 1.5% 
           3: mem: 45.8 MiB (1.1%) command: influxd pid: 1605 cpu: 3.0% 
           4: mem: 37.9 MiB (0.9%) command: node pid: 1211 cpu: 0.0% 
           5: mem: 34.3 MiB (0.8%) command: containerd pid: 540 cpu: 0.4% 
Info:      Processes: 160 Uptime: 33m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 
           alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #14541 - Brand: SanDisk SD Extreme A2 (SN64G)