Benchmark #13603 - pibenchmarks.com

Brand: SanDisk SD Ultra (SL16G)
C10
#32 / 1,539
302
#1,339 / 1,539
#60 / 369
792
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-03-24 15:22:19
#13,603
714
-78 (-10.92%)
Anonymous
SD

Secure Digital (SD) Card Details
SanDisk SD Ultra (SL16G)
C10
13G
SD
SanDisk
SL16G
SDHC
3.00
0x03
SD
8.0
04/2017
Class 10
None
None
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
250 (-150)
1 GB
450
50

Operating System

Raspbian GNU/Linux 9 (stretch)
armv7l

Benchmark Results
4.7 MB/s
21.34 MB/s
21.55 MB/s
273 IOPS
1,852 IOPS
1,093 KB/s
7,410 KB/s
7,032 KB/s
1,793 KB/s
5,853 KB/s
2,496 KB/s

inxi Results
System: Host: cimbaallaan Kernel: 4.19.108-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=520 bcm2708_fb.fbheight=430 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: N/A dm: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.1 MiB used: 301.0 MiB (30.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 Message: Advanced graphics data unavailable in console for root. Audio: Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fe80::2085:6464:a380:1357/64 scope: link IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X IP v6: fe80::9c7d:7970:61de:f61c/64 scope: link WAN IP: 84.86.X.X Drives: Local Storage: total: 126.63 GiB used: 15.23 GiB (12.0%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Crucial model: CT120BX500SSD1 size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: M6CR013 temp: 44 C scheme: MBR SMART: yes state: enabled health: PASSED on: 7 hrs cycles: 14 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 12.99 GiB size: 12.66 GiB (97.47%) used: 10.97 GiB (86.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 label: root uuid: 9b33ac63-10f1-4477-935c-f199b0e1ed0a ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) used: 22.7 MiB (33.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: 024C-2D55 ID-3: /media/pi/SETTINGS2 raw size: 32.0 MiB size: 30.0 MiB (93.69%) used: 461 KiB (1.5%) fs: ext4 block size: 1024 B dev: /dev/mmcblk0p5 label: SETTINGS uuid: c6a0a301-8354-407f-9fae-343614457287 ID-4: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 48E8-EF17 ID-5: /media/pi/rootfs raw size: 111.54 GiB size: 109.73 GiB (98.38%) used: 4.19 GiB (3.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 7854b2a8-7192-4595-b7eb-85ba26d54e89 Unmounted: ID-1: /dev/mmcblk0p1 size: 1.74 GiB fs: vfat label: RECOVERY uuid: 5940-1EB8 ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.4:4 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 174c:55aa Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi 2: deb http://ppa.launchpad.net/opencpn/opencpn/ubuntu/ xenial main Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb https://deb.nodesource.com/node_8.x stretch main 2: deb-src https://deb.nodesource.com/node_8.x stretch main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ stretch main ui Processes: CPU top: 5 1: cpu: 106% command: processcontainerfork.js started by: node pid: 6718 mem: 14.4 MiB (1.5%) 2: cpu: 7.6% command: [w1_bus_master1] pid: 194 mem: 0.00 MiB (0.0%) 3: cpu: 1.3% command: pm2 pid: 924 mem: 44.4 MiB (4.7%) 4: cpu: 1.3% command: smartd pid: 5847 mem: 3.25 MiB (0.3%) 5: cpu: 0.9% command: signalk-server started by: node pid: 379 mem: 57.4 MiB (6.1%) Memory top: 5 1: mem: 57.4 MiB (6.1%) command: signalk-server started by: node pid: 379 cpu: 0.9% 2: mem: 44.4 MiB (4.7%) command: pm2 pid: 924 cpu: 1.3% 3: mem: 31.9 MiB (3.4%) command: xorg pid: 476 cpu: 0.1% 4: mem: 29.2 MiB (3.1%) command: app.js started by: node pid: 938 cpu: 0.4% 5: mem: 27.1 MiB (2.9%) command: app.js started by: node pid: 948 cpu: 0.4% Info: Processes: 160 Uptime: 34m Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Shell: test.sh inxi: 3.0.38

inxi Results

System:
  Host: cimbaallaan Kernel: 4.19.108-v7+ armv7l bits: 32 compiler: gcc 
  v: 4.9.3 
  parameters: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=520 
  bcm2708_fb.fbheight=430 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 
  smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
  vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 
  root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes 
  rootwait 
  Console: N/A dm: LightDM 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:
  Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 
  rev: a02082 
Memory:
  RAM: total: 1002.1 MiB used: 301.0 MiB (30.0%) gpu: 76.0 MiB 
  RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 
  type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A 
  bogomips: 307 
  Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 
  3: 1200 4: 1200 
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls 
  vfp vfpd32 vfpv3 vfpv4 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A 
  chip ID: brcm:soc 
  Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
  Display: server: X.org 1.19.2 driver: fbturbo tty: 80x24 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:
  Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
  type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  IP v6: fe80::2085:6464:a380:1357/64 scope: link 
  IF-ID-1: wlan0 state: up mac: XX:XX:XX:XX:XX:XX 
  IP v4: 192.168.X.X/24 scope: global broadcast: 192.168.X.X 
  IP v6: fe80::9c7d:7970:61de:f61c/64 scope: link 
  WAN IP: 84.86.X.X 
Drives:
  Local Storage: total: 126.63 GiB used: 15.23 GiB (12.0%) 
  ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.84 GiB 
  block size: physical: 512 B logical: 512 B scheme: MBR 
  SMART Message: Unknown smartctl error. Unable to get data. 
  ID-2: /dev/sda type: USB vendor: Crucial model: CT120BX500SSD1 
  size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 
  speed: 6.0 Gb/s rev: M6CR013 temp: 44 C scheme: MBR 
  SMART: yes state: enabled health: PASSED on: 7 hrs cycles: 14 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / raw size: 12.99 GiB size: 12.66 GiB (97.47%) 
  used: 10.97 GiB (86.7%) fs: ext4 block size: 4096 B dev: /dev/mmcblk0p7 
  label: root uuid: 9b33ac63-10f1-4477-935c-f199b0e1ed0a 
  ID-2: /boot raw size: 69.0 MiB size: 67.9 MiB (98.44%) 
  used: 22.7 MiB (33.5%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 
  label: boot uuid: 024C-2D55 
  ID-3: /media/pi/SETTINGS2 raw size: 32.0 MiB size: 30.0 MiB (93.69%) 
  used: 461 KiB (1.5%) fs: ext4 block size: 1024 B dev: /dev/mmcblk0p5 
  label: SETTINGS uuid: c6a0a301-8354-407f-9fae-343614457287 
  ID-4: /media/pi/boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
  used: 51.8 MiB (20.5%) fs: vfat block size: 512 B dev: /dev/sda1 
  label: boot uuid: 48E8-EF17 
  ID-5: /media/pi/rootfs raw size: 111.54 GiB size: 109.73 GiB (98.38%) 
  used: 4.19 GiB (3.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 
  label: rootfs uuid: 7854b2a8-7192-4595-b7eb-85ba26d54e89 
Unmounted:
  ID-1: /dev/mmcblk0p1 size: 1.74 GiB fs: vfat label: RECOVERY 
  uuid: 5940-1EB8 
  ID-2: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
USB:
  Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 
  Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 
  speed: 480 Mb/s chip ID: 0424:9514 
  Device-1: 1-1.1:3 
  info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
  type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
  chip ID: 0424:ec00 
  Device-2: 1-1.4:4 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E 
  SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
  type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 
  speed: 480 Mb/s chip ID: 174c:55aa 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
  2: deb http://ppa.launchpad.net/opencpn/opencpn/ubuntu/ xenial main
  Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
  1: deb https://deb.nodesource.com/node_8.x stretch main
  2: deb-src https://deb.nodesource.com/node_8.x stretch main
  Active apt repos in: /etc/apt/sources.list.d/raspi.list 
  1: deb http://archive.raspberrypi.org/debian/ stretch main ui
Processes:
  CPU top: 5 
  1: cpu: 106% command: processcontainerfork.js started by: node pid: 6718 
  mem: 14.4 MiB (1.5%) 
  2: cpu: 7.6% command: [w1_bus_master1] pid: 194 mem: 0.00 MiB (0.0%) 
  3: cpu: 1.3% command: pm2 pid: 924 mem: 44.4 MiB (4.7%) 
  4: cpu: 1.3% command: smartd pid: 5847 mem: 3.25 MiB (0.3%) 
  5: cpu: 0.9% command: signalk-server started by: node pid: 379 
  mem: 57.4 MiB (6.1%) 
  Memory top: 5 
  1: mem: 57.4 MiB (6.1%) command: signalk-server started by: node pid: 379 
  cpu: 0.9% 
  2: mem: 44.4 MiB (4.7%) command: pm2 pid: 924 cpu: 1.3% 
  3: mem: 31.9 MiB (3.4%) command: xorg pid: 476 cpu: 0.1% 
  4: mem: 29.2 MiB (3.1%) command: app.js started by: node pid: 938 
  cpu: 0.4% 
  5: mem: 27.1 MiB (2.9%) command: app.js started by: node pid: 948 
  cpu: 0.4% 
Info:
  Processes: 160 Uptime: 34m Init: systemd v: 232 runlevel: 5 Compilers: 
  gcc: 6.3.0 alt: 6 Shell: test.sh inxi: 3.0.38

Benchmark #13603 - Brand: SanDisk SD Ultra (SL16G)