Benchmark #13580 - pibenchmarks.com

Brand: Samsung SM863 Series
SSD (2.5" SATA)
#586 / 1,539
8
#591 / 1,539
#569 / 875
#74 / 363
5,804
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se

Overview
2020-03-24 10:29:47
#13,580
2,947
-2,857 (-96.95%)
xxx
xxx

Storage Details
Samsung SM863 Series
SSD (2.5" SATA)
128G
SSD
Samsung
MZNTD128HAGM-000
SATA
2.10
480
2109:0578
0x2109
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
30.4 MB/s
32.17 MB/s
32.14 MB/s
3,783 IOPS
3,098 IOPS
15,133 KB/s
12,395 KB/s
15,866 KB/s
12,162 KB/s
11,724 KB/s
13,886 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 usb-storage.quirks=152D:0578:u console=ttyS0,115200 console=tty1 root=PARTUUID=a9231c54-fa85-5b45-ae6f-b352f053ca60 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 224.5 MiB (5.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 136x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-2: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 149.07 GiB used: 6.52 GiB (4.4%) ID-1: /dev/mmcblk0 model: EB2MW size: 29.83 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Samsung model: MZNTD128HAGM-000 size: 119.24 GiB block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 8102 drive rev: DXT23K0Q temp: 35 C scheme: GPT SMART: yes state: enabled health: PASSED on: 157d 13h cycles: 2605 Old-Age: media wearout: 199 Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 119.24 GiB size: 116.87 GiB (98.01%) used: 6.47 GiB (5.5%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: 5c806603-5994-48db-9261-27dd1dc46526 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: EF5D-6449 Unmounted: ID-1: /dev/mmcblk0p1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 0E8B-A9BA ID-2: /dev/mmcblk0p10 size: 10.52 GiB fs: ext4 label: Storage uuid: 4d62d5f8-8114-42b0-aab2-88d8f6bae641 ID-3: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A ID-4: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS uuid: 3798f6c1-bf4f-4fe0-87a5-8c0bd0c7b815 ID-5: /dev/mmcblk0p7 size: 15.64 GiB fs: ext4 label: root uuid: fb522952-b404-405c-b3a6-ba05f06f5c75 ID-6: /dev/mmcblk0p8 size: 512.0 MiB fs: ext4 label: data uuid: e8f1e5af-a717-48cb-bf2a-a17a7c96d1ab ID-7: /dev/mmcblk0p9 size: 512.0 MiB fs: vfat label: System uuid: 4984-EEC6 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.4:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:0578 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 1.7% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 2: cpu: 0.9% command: bash pid: 4075 mem: 2.75 MiB (0.0%) 3: cpu: 0.4% command: init pid: 1 mem: 8.03 MiB (0.2%) 4: cpu: 0.2% command: sudo pid: 4066 mem: 3.25 MiB (0.0%) 5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 12.9 MiB (0.3%) command: packagekitd pid: 2925 cpu: 0.0% 2: mem: 8.03 MiB (0.2%) command: init pid: 1 cpu: 0.4% 3: mem: 7.25 MiB (0.1%) command: systemd pid: 660 cpu: 0.0% 4: mem: 7.08 MiB (0.1%) command: polkitd pid: 854 cpu: 0.0% 5: mem: 7.06 MiB (0.1%) command: systemd-journald pid: 111 cpu: 0.0% Info: Processes: 133 Uptime: 24m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 usb-storage.quirks=152D:0578:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=a9231c54-fa85-5b45-ae6f-b352f053ca60 rootfstype=ext4 
           elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 224.5 MiB (5.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 136x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-2: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 149.07 GiB used: 6.52 GiB (4.4%) 
           ID-1: /dev/mmcblk0 model: EB2MW size: 29.83 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Samsung model: MZNTD128HAGM-000 size: 119.24 GiB 
           block size: physical: 512 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s rev: 8102 drive rev: DXT23K0Q temp: 35 C scheme: GPT 
           SMART: yes state: enabled health: PASSED on: 157d 13h cycles: 2605 Old-Age: 
           media wearout: 199 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 119.24 GiB size: 116.87 GiB (98.01%) used: 6.47 GiB (5.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: 5c806603-5994-48db-9261-27dd1dc46526 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p6 label: boot uuid: EF5D-6449 
Unmounted: ID-1: /dev/mmcblk0p1 size: 2.38 GiB fs: vfat label: RECOVERY uuid: 0E8B-A9BA 
           ID-2: /dev/mmcblk0p10 size: 10.52 GiB fs: ext4 label: Storage 
           uuid: 4d62d5f8-8114-42b0-aab2-88d8f6bae641 
           ID-3: /dev/mmcblk0p2 size: 1 KiB fs: N/A label: N/A uuid: N/A 
           ID-4: /dev/mmcblk0p5 size: 32.0 MiB fs: ext4 label: SETTINGS 
           uuid: 3798f6c1-bf4f-4fe0-87a5-8c0bd0c7b815 
           ID-5: /dev/mmcblk0p7 size: 15.64 GiB fs: ext4 label: root 
           uuid: fb522952-b404-405c-b3a6-ba05f06f5c75 
           ID-6: /dev/mmcblk0p8 size: 512.0 MiB fs: ext4 label: data 
           uuid: e8f1e5af-a717-48cb-bf2a-a17a7c96d1ab 
           ID-7: /dev/mmcblk0p9 size: 512.0 MiB fs: vfat label: System uuid: 4984-EEC6 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.4:3 info: JMicron / JMicron USA JMS567 SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 152d:0578 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 1.7% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           2: cpu: 0.9% command: bash pid: 4075 mem: 2.75 MiB (0.0%) 
           3: cpu: 0.4% command: init pid: 1 mem: 8.03 MiB (0.2%) 
           4: cpu: 0.2% command: sudo pid: 4066 mem: 3.25 MiB (0.0%) 
           5: cpu: 0.0% command: [kthreadd] pid: 2 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 12.9 MiB (0.3%) command: packagekitd pid: 2925 cpu: 0.0% 
           2: mem: 8.03 MiB (0.2%) command: init pid: 1 cpu: 0.4% 
           3: mem: 7.25 MiB (0.1%) command: systemd pid: 660 cpu: 0.0% 
           4: mem: 7.08 MiB (0.1%) command: polkitd pid: 854 cpu: 0.0% 
           5: mem: 7.06 MiB (0.1%) command: systemd-journald pid: 111 cpu: 0.0% 
Info:      Processes: 133 Uptime: 24m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.38

Benchmark #13580 - Brand: Samsung SM863 Series